Connection unit REGplus IP20 C6Amodul 270 degrees 130B127003-E

Connection unit REGplus IP20 C6Amodul 270 degrees 130B127003-E – Metz – 4250184136552: Connection unit for mounting on DIN rail TH35 according to DIN EN 60715 in electrical distributors for domestic and industrial installations, equipped with a C6, Amodul 270° RJ45 single module, cable access 45° from below, plug-in direction 45° inclined downwards, GHMT Cat.6, A re- embedded PVP certified, Cat.6, A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603 -7-51 Ed.1 (12/2008), GHMT certified, compliance with Class E, A up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, tested: Component up to 600 MHz, link up to 800 MHz, suitable for 10GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy-to-install connection of data lines AWG 26/1 - 22/1 (single-wire) and AWG 26/7 to 22/7 (stranded) on IDC insulation displacement terminals, identification of the T568A and T568B wire assignment directly on the charging piece, the overall width of 1TE enables the installation of up to 12 REGplus in standard electrical distributors, when installed as a device of Protection class I, the equipotential bonding takes place via an integrated equipotential bonding plate directly on the mounting rail, which is to be connected to the building equipotential bonding via appropriate contact terminals. The module is protected against direct contact by a cover. When installed in double-insulated distributors, protection class II remains. The equipotential bonding spring must be removed for this purpose., integrated dust protection flap (also available in colour)