Automatic video switcher 4K 60 4:2:0 HDMI - Data switch DIP-31

Automatic video switcher 4K 60 4:2:0 HDMI - Data switch DIP-31 – Kramer – 20-8035801290 – 7291063080037: Automatic Video Switcher 4K 60 4:2:0 HDMI DIP-31 DIP-31 is a 4K @60 Hz (4:2:0) automatic switcher for HDMI, VGA, Ethernet, data and unbalanced audio signals. It supports various types of input selection and transmits the signal via HDMI cable to a compatible receiver (for example the VS-62H or a display/projector). The device is a step-in commander when connected to a matrix switch that supports step-in over HDMI, such as the VS-62H. It also provides RS-232 commands to turn monitor/projector on/off. - BYOD Plug & Play automatic switch - Automatic switch can be set to modes such as Priority or Last Connected. If a user switches manually by pressing a button, the automatic switching is temporarily suspended. - Simple switching processes - buttons on the device or remote closing contacts allow flexibility in integration and switching. - HDMI(TM) signal switching - HDMI 2.0 and HDCP 2.2 compliant. Deep Color, xvColor(TM), Lip Sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K and 3D are supported. - I EDIDPro(TM) Kramer's Intelligent EDID Processing - Intelligent EDID processing, storage and passthrough algorithms enable plug and play operation with HDMI sources and displays. - Multi-channel audio switching - Up to 32 channels of uncompressed digital stereo signals to support studio-quality surround sound. - Audio coupling - Automatic detection of an existing analog stereo audio signal. By default, the analog signal can be embedded into the digital output signal, replacing the embedded sound contained in the input signal. - Audio decoupling - The audio signal contained in the video output signal is decoupled and output in parallel as an analog stereo audio signal. This allows the sound to be tapped close to the source, giving additional flexibility when setting up a system. - Cost-effective maintenance - Status LED indicators for HDMI, VGA and HDBT interfaces support easy maintenance and troubleshooting on site. Device management via network connection and browser or via RS-232 connection. Firmware updates via network connection or RS-232 ensure sustainable, practice-tested operation. - Easy installation - Compact, fanless MegaTOOLS(TM) housing, suitable for Kramer table tanks, Kramer rack installation panels. Easily mounted under table tops using the included plastic brackets.