Temperature limiter 230V - Temperature control relay 701160/8-0153-001-23

Temperature limiter 230V - Temperature control relay 701160/8-0153-001-23 – Jumo – 00506382 – 4053877010463: Temperature limiter 230V 701160/8-0153-001-23 Design of the electrical connection Screw connection, Rated control supply voltage Us at AC 60 Hz 110 ... 240V, Type of voltage for actuation AC, With removable terminals, Number of measuring circuits 1, Error storage possible, External reset possible, Number of NC contacts 0 Number of NO contacts 0 Number of changeover contacts 1 Width 22.5mm, height 109mm, depth 124.8mm . The power supply is AC 110 to 240 V, -10/+15%, 48 to 63 Hz, 5 VA. The universal measuring input is freely configurable for resistance thermometers, thermocouples as well as current and voltage signals. TB/TW monitor thermal processes in systems for a set limit value. If this is exceeded, the built-in relay switches the system to an operationally safe state and the LED K1 switches from green to red. If the system returns to the acceptable range, the reset button on the TB must be unlocked manually with a suitable tool. External unlocking is also possible. The TW, on the other hand, resets itself automatically without external influence. A binary output DC 24 V /20 mA can issue a pre-alarm signal at an adjustable temperature before the limit value is reached, which is also displayed via the KV LED. The TB/TW with a width of 22.5 mm is mounted on top-hat rails and wired using screw terminals with a cable cross-section of max. 2.5 mm². It also has cULus approval.