Gigabit PoE+ Switch 5-Port Desktop - Network switch 010/100 Mbit ports DGS-1005P/E

Gigabit PoE+ Switch 5-Port Desktop - Network switch 010/100 Mbit ports DGS-1005P/E – DLink – 0790069440984: Gigabit PoE+ Switch 5-Port Desktop DGS-1005P/E Ethernet, number of 10/100 Mbps RJ45 ports 0, number of 10/100/1000 Mbps RJ45 ports 5, number of 1000 Mbps RJ45 ports 0, number of 10 Gbps RJ45 ports 0, Number of 10 Gbps Mini GBIC ports 0, Number of 100/1000 Mbps Mini GBIC ports 0, Number of 1000 Mbps Mini GBIC ports 0, Number of 40 Gbps Mini GBIC ports 0, Number of 100 Gbps Mini GBIC ports 0, number of combination RJ45/Mini GBIC ports 0, number of 1000 Mbps GBIC ports 0, number of 10/100 Mbps M12 ports 0, number of 100 Mbps SC ports 0, number of 1000 Mbps SC ports (SX) 0, number of 1000 Mbps SC ports (LX) 0, number of 100 Mbps ST ports 0, number of 100 Mbps POF ports 0, number of 1000 Mbps POF ports 0, number of PoE ports 4, number of other ports 0, max. PoE power 60W, mounting type table model (desktop), number of module slots 0, Power over Ethernet 802.3 af (PoE), height 28mm, width 100mm, depth 98mm, switching capacity 10Gbps , Forwarding rate 2000Mbit/s, With the D-Link DGS-1005P 5-Port Gigabit PoE+ Switch you can connect PoE (Power over Ethernet) devices such as WLAN access points (APs), network cameras and IP telephones to the network and supply them these with electricity. Designed for home users and small businesses, the DGS-1005P is compact and silent. This makes it perfect for almost all rooms and offices. Power over Ethernet. The DGS-1005P offers four Gigabit Ethernet ports and supports the PoE standards IEEE 802.3af PoE and IEEE 802.3at PoE. With a total PoE capacity of 60 W, up to 30 W is available per port. This means you can connect compatible devices to the DGS-1005P without additional power. This saves you cables and allows you to install devices in locations without direct access to power outlets. Thanks to the plug-and-play installation, the DGS-1005P requires no further configuration. Thanks to Auto MDI/MDI-X on all ports, no crossover cables are required when connecting additional switches or hubs. Automatic adjustment on each port independently regulates the transmission speed to ensure compatibility with the connected device. With zero-speed filtering and store-and-forward transmission, the DGS-1005P ensures maximum network performance while minimizing the forwarding of erroneous network packets.