Standard storage heater 2kW/400V, white - Standard accumulator 1,5...2kW ETS 200 Plus

Standard storage heater 2kW/400V, white - Standard accumulator 1,5...2kW ETS 200 Plus – Stiebel Eltron – 236424 – 4017212364246: Standard heat storage tank 2kW/400V, white ETS 200 Plus Standard storage tank design, connected load 1.5... 2kW, nominal connected load 2kW, connection voltage 400V, with pre-assembled heating element, with electronic charge controller, AC control system selectable, can be connected to DC control system, fault display, Fluff filter in the air intake area, number of selectable power levels 4, color white, width 605mm, height 650mm, depth 275mm, weight 32kg, rated voltage 1 400V, rated voltage 2 230V, with static discharge, with temperature controller, APPLICATION: Heat storage tank for floor installation as full heating for apartments and Commercial use of low-tariff models with off-times. EQUIPMENT/COMFORT: Heat accumulator with a construction depth of 275 mm incl. 30 mm wall distance grid. Integrated electronic charging and room temperature controller. Operation via display with simple programming. Adjustable room temperature from +5 to +30°C. Room temperature controller with programmable weekly timer with 3 time programs. Adaptive control as a learning function for timer operation. Selectable function to detect an open window. Programmable comfort and setback temperature. Frost protection setting 7°C. Connected load can be reduced in four stages (100/91.6/83.3/75%). Control input for DC signals (0.91-1.43V DC voltage) available as an optional accessory. Optional additional heating can be integrated. Thermal insulation technology ''thermosolid'' for a high heat retention capacity. With fluff filter in the air intake as standard. Particularly quiet with tangential fans. INSTALLATION/SERVICE: Installation directly on the floor or off the floor on Vario consoles. Only one type of core stone (2 stones/package). Easily accessible electrical connection with fold-out connection panel in niches. Connection direct with NYM. Permanent control voltage required. SAFETY: VDE/GS, protection class I, protective temperature limiter.