RCBO 16A B 30mA A - Earth leakage circuit breaker B16/0,03A A9D07616

RCBO 16A B 30mA A - Earth leakage circuit breaker B16/0,03A A9D07616 – Schneider Electric – 3606480484308: RCBO 16A B 30mA A A9D07616, number of poles (total)=2, number of fused poles=1, rated voltage=230 V, rated insulation voltage Ui=400 V, rated impulse withstand voltage Uimp=4 kV, rated current=16 A, rated residual current=0 .03 A, residual current type=A, energy limitation class=3, rated breaking capacity according to IEC 60947-2=10 kA, cut-off characteristic=other, surge current strength=0.25 kA, type of voltage=AC, frequency=50 Hz, tripping characteristic=B, switching neutral conductor =yes, with locking device=no, overvoltage category=3, degree of pollution=3, ambient temperature during operation=25..60 °C, width in modular units=2, installation depth=44 mm, suitable for flush-mounted installation=no, protection against false tripping=no , Degree of protection (IP)=IP20, Connectable conductor cross-section, solid=1..16 mm², Connectable conductor cross-section, stranded=1..10 mm², Residual current circuit breaker with overcurrent protection (FI/LS) Acti 9 iDPN H Vigi, 10kA (IEC/EN 61009). 1-pole+N, rated current 16A, B characteristic, ground fault sensitivity 30mA, ground fault protection class type A, operating voltage (Ue) 230V AC, insulation voltage (Ui) 400V AC. Ensures comprehensive protection of final circuits against overcurrents and residual currents. Switching and disconnecting circuits. Snap action for low-wear switching of the contacts. Mechanically isolated red indicator in the event of a fault tripping of the circuit breaker or tripping due to a residual current. Green marking on the switch knob of the device clearly indicates the switch position. Test button for regular function testing. Technology of trip unit - thermomagnetic. Additional add-on auxiliary modules (optional) - undervoltage release (iMN), overvoltage release (iMSU), shunt release (iMX), auxiliary switch for status reporting (iOF), fault signaling switch (iSD). Tool-free assembly on the left side of the device. Color RAL 9003. The RCD IDPN H Vigi complies with the following standards - IEC/EN 61009 and IEC/EN 60947-2. Furthermore, this series is VDE certified!