Two-hand control device 240VACDC 3 n/o 1 n/c - Two-hand control relay AC 48...240V PNOZ s6.1 48-#...

Two-hand control device 240VACDC 3 n/o 1 n/c - Two-hand control relay AC 48...240V PNOZ s6.1 48-#... – Pilz – 750156 – 4046548045918: Two-hand control device 240VACDC 3 n/o 1 n/c PNOZ s6.1 48-750156 Design of the electrical connection screw connection, DIN rail mounting possible, rated control supply voltage Us at AC 50 Hz 48 ... 240V, rated control supply voltage Us at DC 48 ... 240V, type of voltage for AC/DC actuation, With removable terminals, Design of the switching function of the inputs changer, With feedback loop, Number of outputs, safety-related, instantaneous, with contacts 3, Number of outputs, safety-related, delayed, with contacts 0, Number of outputs, safety-related, instantaneous, Semiconductor 0, number of outputs, safety-related, delayed, semiconductor 0, number of outputs, signaling function, undelayed, with contacts 1, number of outputs, signaling function, delayed, with contacts 0, number of outputs, signaling function, without delay, semiconductor 0, number of outputs , signaling function, delayed, semiconductor 0, suitable for safety functions, type class for safety Requirements according to EN 574 type III A, with approval for BG BIA, with approval according to UL, width 22.5mm, height 100mm, depth 120mm, the two-hand control device meets the requirements of EN 574 type IIIA. It forces the operator to keep their hands out of the hazardous area during the hazardous movement. It is intended for use in two-hand controls. ATTENTION! The two-hand control device must not be used in press controls. It is only suitable for use in the case of a low hazard determined by the risk analysis