Digital low-impedance measurement VDE 0413-4/EN 615574 - Continuity tester optic/acoustic M630W

Digital low-impedance measurement VDE 0413-4/EN 615574 - Continuity tester optic/acoustic M630W – GMC-I Messtechnik – 4012932131918: Digital low resistance measurement VDE 0413-4/EN 615574 M630W Continuity indicator optical/acoustic, Max. resistance test value 20Ohm, The Metraline RLO-Check is a digitally displaying low-resistance measuring device for the safe checking of line resistances up to 20 Ohm in electrical systems with nominal voltages of up to 500V, it is suitable for quick and Safe checking of larger protective conductors, grounding and potential equalization conductors, as well as shielding and lightning protection systems, the measured value is displayed on the red (bad) or blue (good) backlit digital display, in addition, a value < 1 ohm can be signaled with a buzzer, cable drum with 30 m cable, measurement of contact resistance, measuring range: 0.00 ohm ... 20.0 ohm, acoustic signaling of continuity (R < 1 ohm), external voltage detection acoustically and visually, external voltage display: 8 ... 400 V, automatic polarity reversal DIN EN 61557-4/VDE 0413-4, adjustment function for cable drum and accessories, (maximum 4 ohms can be compensated), test certificate, extensive accessories, scope of delivery: 1 measuring device, 4 batteries (AA), 1 lap belt, 1 cable drum with 30 m Cable, 1 test probe with protective cap, 1 crocodile clip, 1 spiral measuring cable, 1 PE adapter for sockets, 1 short-circuit shunt (0 ohm), 1 calibration shunt for continuity threshold (1 ohm), 1 operating manual, 1 test certificate