RCCB A 16/0.03A IP41 - Residual current breaker 2-p GW95926

GW95926 8011564226593 EAN/GTIN DE 52868575 WEEE

Our best price
¥723.06 excl. VAT
¥1,735.99 (-58.35% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
RCBO A 16/0.03A IP41 GW95926, number of poles=2, rated voltage=230 V, rated current=16 A, rated... more
RCCB A 16/0.03A IP41 - Residual current breaker 2-p GW95926 – Gewiss – 8011564226593: RCBO A 16/0.03A IP41 GW95926, number of poles=2, rated voltage=230 V, rated current=16 A, rated residual current=0.03 A, rated insulation voltage Ui=500 V, rated impulse withstand voltage Uimp=4 kV, mounting type=built-in , residual current type=A, selective type=no, short-time delayed type=no, type of voltage=AC, with locking device=no, frequency=50/60 Hz, additional equipment possible=no, degree of protection (IP)=IP41, ambient temperature during operation =-25..40 °C, degree of pollution=2, connectable conductor cross-section stranded=16 mm², connectable conductor cross-section solid=16 mm², explosion-proof=no, residual current circuit breaker for flush-mounted installation in a device box with an installation opening of 60 mm. It can be attached either with the integrated fastening claws or with screws (not included) in the device box. The RCD comes with a full cover. Connection with screwless terminals 2.5 mm² on the incoming and outgoing side.
... more
Number of poles 2
Rated voltage 230V
Rated current 16 A
Rated fault current 0.03 A
Rated insulation voltage Ui 500V
Rated impulse withstand voltage Uimp 4 kV
Mounting Built-in
Fault current type A
Selective type no
Short time delayed type no
Voltage AC
With locking device no
Frequency 50/60 Hz
Additional equipment possible no
IP protection) IP41
Pollution degree 2
Explosion protection no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "RCCB A 16/0.03A IP41 - Residual current breaker 2-p GW95926"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.