Print relay 2S, max 50A - Switching relay DC 12V 50A 67.23.9.012.4500

Print relay 2S, max 50A - Switching relay DC 12V 50A 67.23.9.012.4500 – Finder – 8012823375540: Print relay 2S, max 50A 67.23.9.012.4500 Design of the electrical connection PCB connection, rated current 50A, rated control supply voltage Us at DC 12 ... 12V, type of voltage for actuation DC, drive, polarity non-poled, switching behavior of the drive monostable, number of contacts as opener 0 , number of contacts as NO contact 3, number of contacts as changeover contact 0, type of switching contact other, degree of protection (IP) IP40, width 33mm, height 57.5mm, depth 51.5mm, power relay for circuit board for use in inverters, 3 NO contacts for 50 A (AC1), max. inrush current 150 A - 5 ms, bridge contacts, contact material AgSnO², contact opening larger than 5.2 mm, nominal voltage 400 V AC, max. switching voltage 690 V AC, max. switching capacity AC1/AC7a (400 V AC) 20,000 VA, max. switching capacity AC15 (230 V AC) 2,300 VA, 1-phase motor load, AC3 operation (230 V AC) 2 kW, 3-phase motor load, AC3 operation (480 V AC) 7 kW, minimum switching load 1000 mW at 10V/10mA, ambient temperature -40 to +70°C b ei max. continuous contact current and control within the working range, ambient temperature up to 85 ° C in power saving mode at. Max. continuous contact current, control range and operation in the holding voltage range, rated coil power 1.7 W, minimum holding power 0.17 W, coil voltage 12 V DC, standard operation: working range 0.9 to 1.1 x Un, in energy-saving mode: 0.95 to 2, 5 x Un (less than 1 s), holding voltage range 0.32 to 0.65 x Un, minimum holding power 0.17 W, distance between circuit board and relay base plate for air circulation is 1.5 mm.