Ratchet ring wrench. black=10mm - Combination spanner 10mm 11 2510

Ratchet ring wrench. black=10mm - Combination spanner 10mm 11 2510 – Cimco – 4021103125106: Ratchet ring wrench. SW=10mm 11 2510 Wrench size jaw side 10mm, wrench size ring side 10mm, head width jaw side 21mm, head width ring side 20.7mm, head height jaw side 6.7mm, head height ring side 7.7mm, length 159mm, cranked, ratchet design, number of corners 12, ratchet ring and Open-end wrench for ratcheting loosening or quick tightening of screws and nuts in one go without using the ring ratchet. On one side open-end wrench with 15 degree offset, on the other side a ring spanner of the same size with built-in ratchet mechanism with special advantages: ratchet with fine teeth: 72 teeth = only 5 degrees minimum swivel angle. Left and right rotation is achieved by simply turning the key and not by means of an annoying switch lever, which often shifts unintentionally. The keys build very narrow despite the ratchet. This means that the tools can be used particularly well in confined spaces. 12-point ring with flank drive, i.e. the drive no longer takes place via the corners of the screw head but on the flanks, which means that a significantly higher power transmission is achieved and the edges of screw heads and nuts are protected Drop-forged chrome-vanadium steel, specially hardened, highly polished, nickel-plated and hard-chromed. Very high torque transmission, the DIN requirements are exceeded. 10mm