3-wire diode clamp with 1N4007 diode, large - Diode terminal block 2001-1311/1000-411

WAGO - 2001-1311/1000-411 - 3-wire diode clamp with 1N4007 diode, large - Diode terminal block 2001-1311/1000-411
Photo source: fig. possibly similar
Photo source: fig. possibly similar
2001-1311/1000-411 4045454537579 EAN/GTIN DE 40917098 WEEE

¥2,033.84 excl. VAT
¥3,303.85 (-38.44% RRP***)
(For 100 Piece) plus shipping

15-16 days* (CHN)

x 100 Piece
Add to wish list
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Diode terminal block Connectable conductor cross section fine-strand without cable end sleeve... more
3-wire diode clamp with 1N4007 diode, large - Diode terminal block 2001-1311/1000-411 – WAGO – 4045454537579: Diode terminal block Connectable conductor cross section fine-strand without cable end sleeve 0,25 ... 2,5mm², Connectable conductor cross section fine-strand with cable end sleeve 0,75 ... 1,5mm², Connectable conductor cross section solid-core 0,5 ... 2,5mm², Connectable conductor cross section multi-wired 0,25 ... 1,5mm², Rated current In 0,5A, Rated voltage 250V, Type of electrical connection 1 Spring clamp connection, Type of electrical connection 2 Spring clamp connection, Connection position Above, Number of levels 1, Number of clamp positions per level 3, Mounting method DIN rail (top hat rail) 35 mm, Material insulation body Thermoplastic, Operation temperature 105 ... 105°C, Inflammability class of insulation material acc. with UL94 V0, Width/grid dimension 4,2mm, Height at lowest possible mounting height 33mm, Length 59,5mm, Closing plate required, Colour Grey, Type of component Diode
... more
Explosion-tested version "Ex e no
Rated current In 0.5 A
Rated voltage 250V
Number of floors 1
Number of clamping points per floor 3
Floors internally bridged no
Mounting DIN rail TH35
Material of the insulating body Thermoplastic
Operating temperatur 105 °C
Width 4.2 mm
Height 59.2 mm
Depth 32.9 mm
End plate required yes
Colour gray
Components type Diode

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "3-wire diode clamp with 1N4007 diode, large - Diode terminal block 2001-1311/1000-411"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.