MFP8 T568A Cat.6 angled - RJ45 8(8) plug J00026A4004

Telegärtner - J00026A4004 - MFP8 T568A Cat.6 angled - RJ45 8(8) plug J00026A4004
Photo source: fig. possibly similar
J00026A4004 4018359448950 EAN/GTIN DE 76541091 WEEE

Our best price
¥118.55 excl. VAT
¥177.82 (-33.33% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
MFP8 T568A Cat.6 angled J00026A4004 Version plug, connector type RJ45 8(8), shielded, category 6,... more
MFP8 T568A Cat.6 angled - RJ45 8(8) plug J00026A4004 – Telegärtner – 4018359448950: MFP8 T568A Cat.6 angled J00026A4004 Version plug, connector type RJ45 8(8), shielded, category 6, connection type other, suitable for round cables, suitable for stranded conductors, suitable for solid conductors, color silver, AWG range 22 ... 27, The IP20-protected RJ45 connector MFP8 4x90 Cat.6A (ISO/IEC) with angled housing and locking of the cable outlet in four 90° steps enables time-saving and reliable assembly on site. Excess cable lengths and the resulting space problems are a thing of the past. And thanks to its compact design, the multiport-capable MFP8 4x90 Cat.6A (ISO/IEC) can also be used in the tightest of spaces. Ideal for the control cabinet or in devices. pre-assembled protective cap, robust zinc die-cast housing, 360° shielding, fully automatic shielding between the wire pairs, 3-stage cable clamping (cable diameter 5.0 to 9.0 mm), can be assembled in 60 seconds and without special tools, optimized for field use, even under difficult conditions, Secure transmission even in the event of external interference, 4-chamber wire manager (available with color coding T568A or T568B and PROFINET), suitable for cabling in office buildings, data centers, industrial plants and home networks, highest reliability, ideal for repairing and expanding networks, penetration contacts suitable for solid conductors and stranded conductors, Cu conductor diameter: (J00026A4000, -1, -2, -4110, -4111, -4112) solid wire 0.51 - 0.64 mm (AWG24/1 - 22/1) stranded 0.46 - 0.76 mm (AWG27/7 - 22/7) strand 0.61 - 0.78 mm (AWG24/19 - 22/19)*, core diameter: 1.0 - 1.6 mm, IP20, cable outer diameter: 5 .5 - 10.0 mm, cable feed freely selectable (4x90°), cable strain relief: SW13, category 6A (ISO/IEC) according to ISO/IEC 11801, service life >= 750 mating cycles, PoE+ according to IEEE 802.3at, connector according to IEC 60603- 7-51, temperature range: -40°C to 85°C, shielding housing material: nickel-plated die-cast zinc, contact surface material: Ni1.2Au0.8, reconnectability: <= 4 cycles, AWG 26/1-24/1, AWG 27/7 -24/7, with pre-assembled protective cap, MFP8-4x90 T568A Cat.6A (ISO/IEC)
... more
Execution Plug (plug)
Connector type RJ45 8 (8)
Shielded yes
Category 6A (IEC)
Connection other
Special tool necessary yes
Suitable for round cables yes
Suitable for flat cables no
Suitable for stranded conductors yes
Suitable for solid conductors yes
Colour Silver
AWG area 22..27

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "MFP8 T568A Cat.6 angled - RJ45 8(8) plug J00026A4004"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.