Redundancy module 20 A output current - DC-power supply 6EP4346-7RB00-0AX0

Siemens - 6EP4346-7RB00-0AX0 - Redundancy module 20 A output current - DC-power supply 6EP4346-7RB00-0AX0
Photo source: fig. possibly similar
Photo source: fig. possibly similar
6EP4346-7RB00-0AX0 4025515155232 EAN/GTIN DE 23691322 WEEE

¥569.78 excl. VAT

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Redundancy module 20 A output current 6EP4346-7RB00-0AX0 Voltage type of the supply voltage DC,... more
Redundancy module 20 A output current - DC-power supply 6EP4346-7RB00-0AX0 – Siemens – 4025515155232: Redundancy module 20 A output current 6EP4346-7RB00-0AX0 Voltage type of the supply voltage DC, 1st output voltage 24 ... 56V, rated value of output current 1 20A, rated supply voltage at DC 12 ... 48V, design of the electrical connection spring-loaded connection, DIN rail mounting possible, suitable for series installation, Installation width 35mm, installation height 225mm, width 35mm, height 135mm, depth 125mm, degree of protection (IP) IP20, SITOP RED1200 redundancy module input/output: DC 24/48V/20 A suitable for decoupling two SITOP power supplies with a maximum output current of 10 A each The redundancy modules SITOP RED1200 are the perfect addition to any 12, 24, 48V power supply to provide additional protection against supply failure. The redundancy module decouples two 12, 24, 48 V power supplies of the same type, so that if one power supply fails, the loads can still be supplied via the second power supply. Using the redundancy modules, power supplies of the same type can also be connected in parallel to increase performance. No matter what industry, no matter what requirement -? Siemens offers reliable and efficient power supplies for every system.
... more
Voltage type of the supply voltage DC
1. Output voltage 12..48 V
Output voltage adjustable no
Nominal output voltage 1 24V
Nominal value of output current 1 20 A
Rated supply voltage at DC 12..48 V
Rail mounting possible yes
Wall mounting possible no
Suitable for serial installation yes
Installation width 35 mm
Installation height 225 mm
Direct mounting possible no
Width 35 mm
Height 135 mm
Depth 125 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Redundancy module 20 A output current - DC-power supply 6EP4346-7RB00-0AX0"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.