SIMATIC DP electrical module ET 200SP - Fieldbus analogue module 4 In / 0 Out 6ES71366AB000CA1

SIMATIC DP electrical module ET 200SP - Fieldbus analogue module 4 In / 0 Out 6ES71366AB000CA1 – Siemens – 4047623410416: SIMATIC DP Elekt.modul ET 200SP 6ES71366AB000CA1 supply voltage at DC 19.2 ... 28.8V, voltage type of the supply voltage DC, input, voltage, input signal configurable, resolution of the analog inputs 16 bit, number of analog inputs 4, number of analog outputs 0, Analog inputs configurable, number of HW interfaces Industrial Ethernet 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW Interfaces serial TTY 0, number of HW interfaces in parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0, number of HW interfaces other 0, system component, degree of protection (IP) IP20, DIN rail mounting possible, rack Installation possible, suitable for safety functions, SIL according to IEC 61508 3, performance level according to EN ISO 13849-1 level e, explosion protection category for gas ATEX gas explosion protection, cat. 3G, width 15mm, height 73mm, depth 58mm, SIMATIC DP, electronics module ET 200SP, F-AI 4xU 0..10V HF, fail-safe analog inputs, up to PL E (ISO 13849), up to SIL 3 (IEC 61508) The SIMATIC ET 200SP is a modular, scalable and highly flexible, decentralized peripheral system. Due to its small footprint, it is particularly designed for installation in small switch boxes close to the machine. The modules can either be plugged directly into an ET 200SP CPU or connected to a central controller via PROFINET or PROFIBUS. The SIMATIC ET 200SP can be expanded with up to 64 I/O modules that can be plugged in in any combination. The system offers a very extensive range of assemblies. Many modules are also available in different versions, which significantly improves scalability in terms of functionality and price. In addition to modules with standard functionality (ST), modules with an extended range of functions and diagnostics (HF High Feature / HS High Speed) are also available. Modules with basic functionality (BA) are available for price-sensitive applications. The advantage of the ET 200SP system lies in its ease of use, e.g. B. through the free choice of the PROFINET connection technology via the bus adapter, the tool-free wiring with push-in technology, improved accessibility of the wiring through the new arrangement of the spring openers next to the associated conductor opening and the channel-specific diagnostic functions. The possibility of changing modules and terminal boxes during operation, the so-called hot-swapping, ensures machine availability and productivity. The scalable and cost-optimized configuration of an ET 200SP station is guaranteed by the comprehensive range of signal modules. In addition to digital and analog input and output modules, there are also fail-safe versions available for applications up to SIL 3 / PLe. This also applies to the integrated motor starters, which are suitable for motors up to 5.5 kW. Energy meter for measuring and analyzing energy consumption, IO-Link master (V1.1.) and many other communication and technology modules enable the system to be adapted to any automation task.