Blitzductor XT surge arrester - Combined arrester for signal systems BXT ML4 BC EX 24

Dehn - BXT ML4 BC EX 24 - Blitzductor XT surge arrester - Combined arrester for signal systems BXT ML4 BC EX 24
Photo source: fig. possibly similar
Photo source: fig. possibly similar
BXT ML4 BC EX 24 920384 4013364109162 EAN/GTIN DE 11890845 WEEE

¥1,121.78 excl. VAT
¥2,236.33 (-49.84% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge arrester Blitzductor XT BXT ML4 BC EX 24 Rated voltage DC 24 ... 24V, maximum continuous... more
Blitzductor XT surge arrester - Combined arrester for signal systems BXT ML4 BC EX 24 – Dehn – 920384 – 4013364109162: Surge arrester Blitzductor XT BXT ML4 BC EX 24 Rated voltage DC 24 ... 24V, maximum continuous voltage AC 23.3V, maximum continuous voltage DC 33V, lightning impulse current (10/350 µs) 4kA, nominal discharge current (8/20) 20kA, protection level wire/ Wire 45V, protection level wire/earth 1100V, limit frequency 6.4MHz, type of installation on base element, arrester monitoring, explosion-tested design, space-saving surge arrester module with LifeCheck to protect up to four floating single wires with a common reference potential of intrinsically safe measuring circuits, meets FISCO requirements. ATEX. Insulation resistance > 500 V wire-earth. LifeCheck detects thermal or electrical overload conditions after which the arrester must be replaced. The display is contactless using DEHNrecord LC / SCM / MCM.
... more
Rated voltage DC 24V
Highest continuous voltage AC 23.3 V
Highest continuous voltage DC 33 V
Lightning impulse current (10/350 µs) 4 kA
Nominal discharge current (8/20) 20 kA
Nominal load current 0.5 A
Protection level wire / core 45 V
Protection level core / earth 1100 V
Cut-off frequency 6.4 MHz
Mounting on base element
SPD yes
With telecommunication contact no
Explosion-tested version yes
Separation option for signal circuit no
Number of conductors (without earth) 4
Earthing via other
Overall width 12 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Blitzductor XT surge arrester - Combined arrester for signal systems BXT ML4 BC EX 24"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.