Dome module - Fieldbus power supply/segment module 750-628

750-628 4045454830991 EAN/GTIN DE 40917098 WEEE

Our best price
¥835.70 excl. VAT

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Coupling module 750-628 Supply voltage at DC 24... 24V Type of supply voltage DC Number of HW... more
Dome module - Fieldbus power supply/segment module 750-628 – WAGO – 4045454830991: Coupling module 750-628 Supply voltage at DC 24... 24V Type of supply voltage DC Number of HW interfaces Industrial Ethernet 0 Number of interfaces PROFINET 0 Number of HW interfaces serial RS-232 0 Number of HW Interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of HW interfaces wireless 0, number of HW interfaces USB 0 , Number of HW interfaces other 2, Supports protocol for other bus systems, System component, Degree of protection (IP) IP20, Design of the electrical connection spring-loaded connection, Suitable as a segment module, Fieldbus connection possible via separate bus coupler, DIN rail mounting possible, Explosion protection category for gas without, explosion protection - Category for dust without, width 25mm, height 65mm, depth 100mm, The coupler terminal for terminal bus extension replaces the fieldbus coupler/controller on one bus terminal block. The connection cable is plugged into the upper RJ-45 socket and thus establishes the logical connection to the fieldbus coupler/controller via the end terminal. The extension is completely transparent for the fieldbus coupler/controller. All functions of the Bus Terminal system remain unchanged. The lower RJ-45 socket allows the system to be extended further. The entire system can be expanded in 10 steps. The supply voltage for the field level and the internal electronics can be fed in separately. Both levels are thus galvanically isolated from each other. Two diagnostic LEDs provide information about the supply voltage for the respective bus terminal block (internal and field level). Two LEDs in the input socket indicate error-free communication with the bus coupler. The terminal can be used as the last coupler terminal in the system (switch on the terminating resistor) or as a bridge between two bus terminal blocks.
... more
Supply voltage at DC 24V
Voltage type of the supply voltage DC
Number of HW interfaces other 2
With optical interface no
Supports protocol for TCP / IP no
Supports protocol for PROFIBUS no
Supports protocol for CAN no
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS no
Supports data highway protocol no
Supports protocol for DeviceNet no
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP no
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Supports protocol for other bus systems yes
Wireless standard Bluetooth no
Wireless standard WLAN 802.11 no
Radio standard GPRS no
Radio standard GSM no
Radio standard UMTS no
System component yes
IP protection) IP20
With electrical isolation yes
With feed module no
Suitable as a segment module yes
Distance module no
Bus diagnostics possible no
Rail mounting possible yes
Wall / direct mounting possible no
Front installation possible no
Rack mounting possible no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Explosion protection category for gas without
Explosion protection category for dust without
Width 24 mm
Height 100 mm
Depth 69.8 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Dome module - Fieldbus power supply/segment module 750-628"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.