Staircase light time switch 8-230VUC,1S,16A - Staircase lighting timer 1...12min TLZ61NP-230V+UC

TLZ61NP-230V+UC 61100301 4010312400739 EAN/GTIN DE 30298319 WEEE

Our best price
¥268.48 excl. VAT
¥491.11 (-45.33% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Staircase timer switch 8-230VUC,1S,16A TLZ61NP-230V+UC Electronic function with switch-off... more
Staircase light time switch 8-230VUC,1S,16A - Staircase lighting timer 1...12min TLZ61NP-230V+UC – Eltako – 61100301 – 4010312400739: Staircase timer switch 8-230VUC,1S,16A TLZ61NP-230V+UC Electronic function with switch-off warning, flush-mounting type, width in modular units 0, installation depth 18mm, number of contacts as NO contact 1, number of contacts as NC contact 0, number of contacts as changeover contact 0, Control voltage 1 230 ... 230V, type of control voltage 1 AC, frequency of control voltage 1 50 ... 50Hz, control voltage 2 8 ... 230V, type of control voltage 2 AC/DC, rated switching current 10A, release delay 1 ... 12min, button glow lamp current 50mA, Switching type 3- and 4-wire circuit, switch-off pre-warning flickering, downstream switching + continuous light + time extension, supply voltage 250 ... 250V, type of supply voltage AC, max. incandescent lamp load 2000W, max. fluorescent lamp load 1000VA, max. 1000VA, max. fluorescent lamp load (parallel compensated) 500VA, staircase time switch 230V+UC. 1 NO contact not potential-free 10A/250V AC, incandescent lamps up to 2000W, ESL and LED lamps up to 200W, switch-off early warning and button permanent light can be switched on. Standby loss only 0.7 watts. With ESL optimization. For flush mounting. 45mm long, 45mm wide, 18mm deep. Contact switching in the zero crossing to protect the contacts and lamps. In particular, this extends the life of energy-saving lamps. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. After installation, wait for the brief automatic synchronization before the switched consumer is connected to the mains. Control supply and switching voltage 230V. Additionally with electrically isolated universal control voltage 8..230V UC. Time setting 1 to 12 minutes. Glow lamp current up to 50mA, depending on the ignition voltage of the glow lamps. For 3- and 4-wire circuits, reconnectable, with attic lighting for 4-wire circuit. Automatic recognition of the switching type. After a power failure, the lighting is switched on again if the time has not yet expired. When the switch-off pre-warning is switched on, the lighting flickers approx. 30 seconds before the time expires and a total of 3 times at increasingly shorter intervals. When the button permanent light is switched on, buttons can be used to switch to permanent light for longer than 1 second, which is switched off automatically after 60 minutes or can be switched off with buttons for longer than 2 seconds. If the button permanent light and switch-off pre-warning are switched on, the switch-off pre-warning is only given after the permanent light has been switched off. If energy-saving lamps ESL are fully or partially switched on, then set the switch-off pre-warning with the button ESL permanent light on the lower rotary switch. Within the first second after switching on or after switching on, the time can be extended with the TLZ functions by briefly pressing the button up to 3 times (pumping). Each button adds the set time once. Can be switched to the ESV function, impulse switch with release delay of up to 120 minutes. In this function, the device switches off automatically after the adjustable delay time has elapsed if the manual off command was not given. If the delay time is set to a minimum in the ESV function, the off-delay is switched off and the normal impulse switch function ES results.
... more
Function electronic with switch-off early warning
Mounting Flush
Depth 18 mm
Number of contacts as normally open 1
Control voltage 1 230V
Control voltage type 1 AC
Frequency of control voltage 1 50 Hz
Control voltage 2 8..230 V
Control voltage type 2 AC/DC
Rated operating current 10 A
Release delay 1..12 min
Button glow lamp current 50mA
Switching 3- and 4-wire circuit
Switch-off flicker
Surge function selectable no
Supply voltage 250V
Voltage type of the supply voltage AC
Max. Incandescent lamp load 2000 W
Max. Fluorescent lamp load 1000 VA
Max. switching capacity LED 200 W

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Staircase light time switch 8-230VUC,1S,16A - Staircase lighting timer 1...12min TLZ61NP-230V+UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.