Combined arrester PRD1 25R, 1-pole, type 1+2 - Surge protection for power supply 16329

Schneider Electric - 16329 - Combined arrester PRD1 25R, 1-pole, type 1+2 - Surge protection for power supply 16329
Photo source: fig. possibly similar
16329 3606480060397 EAN/GTIN DE 33842582 WEEE

¥1,937.80 excl. VAT
¥4,047.23 (-52.12% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Combined arrester PRD1 25R 1P Typ1+2 16329 network form IT, network form TN-C, number of... more
Combined arrester PRD1 25R, 1-pole, type 1+2 - Surge protection for power supply 16329 – Schneider Electric – 3606480060397: Combined arrester PRD1 25R 1P Typ1+2 16329 network form IT, network form TN-C, number of conductors (without earth) 1, nominal discharge current (8/20) 25kA, nominal voltage AC 230V, highest continuous voltage AC 350V, max. discharge current (8/20) 40kA, mounting type DIN rail TH35, size 4 TE, protection level 1.5kV, max. conductor cross-section solid (solid/stranded) 35mm², max. conductor cross-section flexible (finely stranded) 35mm², protection level N-PE 1.5kV, with remote signaling contact, integrated backup fuse, Optical signaling on the device, test class type 2, degree of protection (IP) IP20, combined arrester PRD1 25r. 1-pole, surge arrester class type 1+2, rated discharge current 25kA, maximum continuous voltage (Uc) 350V, rated voltage (Un) 230V. Overvoltage protection of low-voltage systems. Type 1+2 offers additional protection against transient overvoltages. The installation takes place at the feed point of the system. Arresters of the PRD1 25r and PRD1 Master series have pluggable protection modules. The combined arrester PRD1 25R meets the following standards: IEC 61643-1 and EN 61643-11.
... more
Network form DC no
Network form IT yes
Network shape TN no
Mains form TN-C yes
Mains form TN-CS no
Mains form TN-S no
Network shape TT no
Network form other no
Number of poles 1
Highest continuous voltage AC 350V
Rated voltage AC 230V
Protection level 1.5 kV
Mounting DIN rail TH35
Size 2 TE
Remote signaling yes
Signaling on the device optical
Test class Type 1 and 2
Integrated backup fuse no
Voltage switching spark gap technology yes
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Combined arrester PRD1 25R, 1-pole, type 1+2 - Surge protection for power supply 16329"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.