LED emergency wall light 79x198x198 - Emergency luminaire 3,2W IP65 672305.002.1

RZB - 672305.002.1 - LED emergency wall light 79x198x198 - Emergency luminaire 3,2W IP65 672305.002.1
Photo source: fig. possibly similar
Photo source: fig. possibly similar
672305.002.1 4051859241133 EAN/GTIN DE 15524944 WEEE

¥1,174.51 excl. VAT
¥1,807.44 (-35.02% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
LED emergency wall light 79x198x198 672305.002.1 Mounting type Wall mounting, Escape route... more
LED emergency wall light 79x198x198 - Emergency luminaire 3,2W IP65 672305.002.1 – RZB – 4051859241133: LED emergency wall light 79x198x198 672305.002.1 Mounting type Wall mounting, Escape route lighting function, Suitable for other marking type, Type of marking not applicable, Monitoring device without, Switching type maintained/standby mode, Central feed (central battery), Battery properties other, LED lamps not replaceable, With lamps , Suitable for number of lamps 1, socket without, number of lamp heads 1, housing material plastic, housing color white, cover material other, type of voltage AC/DC, nominal voltage 220 ... 240V, ballast electronic ballast, light distributor without, energy efficiency class of permanently installed lamp A++, A+, A (LED), degree of protection (IP) IP65, degree of protection (NEMA) other, impact resistance IK08, protection class I, rated ambient temperature according to IEC62722-2-1 25 ... 25°C, max. system power 3.2W, rated luminous flux according to IEC 62722-2-1 190lm, luminous flux in standby mode 190lm, color temperature 6500 ... 650 0K, width 198mm, height/depth 198mm, length 79mm, type of wiring termination, number of positions 3, conductor cross-section 2.5mm², connection type plug-in connection, cover plastic (polycarbonate). Die-cast aluminum bracket, powder-coated. LED lamp insert with clear plastic lenses for area lighting. Pivotable vertically. Built-in operating device. Bulbs (LED) included. Energy efficiency class Label not required I Label not required I A++
... more
Mounting Wall Surface
Function escape route lighting
Suitable for marking type other
With pictogram no
Monitoring device without
With remote switch connection no
With remote no
Feed central (central battery)
Battery condition other
Lamp LED not interchangeable
With bulbs yes
Suitable for number of lamps 1
Version without
Number of lamp heads 1
Material of the housing Aluminum
Housing Color white
Material of the cover Plastic transparent
Voltage AC/DC
Nominal voltage 220..240 V
LED rated current at constant current 12..13 mA
Control gear ELECTRONIC BALLAST
Replaceable operating device yes
light distributor without
Constant luminous flux control no
IP protection) IP65
Protection class (NEMA) other
Impact resistance IK08
Protection class I
Max. System performance 3.9 W
Rated luminous flux according to IEC 62722-2-1 190 lm
Luminous flux in standby mode 230 lm
Color temperature 6500K
Power factor 2196 mm
Width 198 mm
Height / depth 198 mm
Length 79 mm
Number of poles 3
Cross section 2.5 mm²
Connection Plug-in connection

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "LED emergency wall light 79x198x198 - Emergency luminaire 3,2W IP65 672305.002.1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.