LED wall light 4000K insulation. - Ceiling-/wall luminaire 1x4W 582004.004.25

LED wall light 4000K insulation. - Ceiling-/wall luminaire 1x4W 582004.004.25 – RZB – 4051859217565: LED wall light 4000K insulation. 582004.004.25 Suitable for wall mounting, Suitable for surface mounting, LED illuminant cannot be replaced, With illuminant, Suitable for computer workstations according to EN 12464-1, Suitable for number of illuminants 1, Other socket, Housing material aluminium, Housing color silver, Cover material opal glass, Version of the Louvre without, Type of voltage AC, Rated voltage 220 ... 240V, Control gear not required, Without dimming function, Light distributor without, Light distribution symmetrical, Beam angle unshielded/diffuse, Light emission direct, Rated service life L70/B50 at 25 °C 35000h, Degree of protection (IP) IP66, Degree of protection (NEMA) other, impact resistance IK08, protection class I, rated ambient temperature according to IEC62722-2-1 -20 ... 60°C, glow wire test according to IEC 60695-2-11 960 °C - 30 s, suitable for lamp power 4 ... 4W, max. system power 4W, rated luminous flux according to IEC 62722-2-1 160lm, light color white, color temperature 4000 ... 4000K, color rendering index CRI 80-89, luminaire li Yield 40lm/W, height/depth 70mm, outer diameter 268mm, type of wiring termination, number of poles 3, conductor cross section 2.5mm², connection type plug-in terminal, elegant appearance without visible screws thanks to bayonet catch with snap lock. LED: Use of smart, low-cost LED modules for mains voltage with high LED system light output for energy-saving operation. Housing made of corrosion-resistant die-cast aluminium, powder-coated, robust design. Fast installation: Tolerance compensation for drill holes. Generous cable management space also allows wall outlets in the center of the luminaire. Electrical connection via plug-in terminals. Fastening points outside the lamp compartment, safe installation through consistent avoidance of errors. Second cable entry for network forwarding. Seawater resistant coating optionally available. Housing made of corrosion-resistant die-cast aluminum for outdoor use, powder-coated. Planar diffuser in opal glass with mounting fixation. Screwless installation of the diffuser via bayonet catch with snap lock. Fastening outside the sealed area with bore tolerance compensation. Light source (mains voltage LED module) included. Including built-in twilight switch. Mains connection 2x 3x 1.5 mm².