Overvoltage protection - Surge protection for signal systems S-PT-1X2-24DC-1/2

Phoenix - S-PT-1X2-24DC-1/2 - Overvoltage protection - Surge protection for signal systems S-PT-1X2-24DC-1/2
Photo source: fig. possibly similar
Photo source: fig. possibly similar
S-PT-1X2-24DC-1/2 2882569 4046356091657 EAN/GTIN DE 50738265 WEEE

¥935.01 excl. VAT
¥1,783.06 (-47.56% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection S-PT-1X2-24DC-1/2'' Rated voltage DC 24... 24V, maximum continuous voltage... more
Overvoltage protection - Surge protection for signal systems S-PT-1X2-24DC-1/2 – Phoenix – 2882569 – 4046356091657: Overvoltage protection S-PT-1X2-24DC-1/2'' Rated voltage DC 24... 24V, maximum continuous voltage AC 28V, maximum continuous voltage DC 40V, rated discharge current (8/20) 10kA, rated load current 0.45A, protection level wire/wire 80V , line/earth protection level 450V, limit frequency 2MHz, other type of installation, connection 1 terminal, signaling on the device without, overvoltage protection in the IP67 screw-on module for measuring sensors, direct installation via 1/2 NPT external thread, cable gland for signal line, two-stage protective circuit. HART capable.
... more
Rated voltage DC 24V
Highest continuous voltage AC 28 V
Highest continuous voltage DC 40V
Nominal discharge current (8/20) 10 kA
Nominal load current 0.45 A
Protection level wire / core 80V
Protection level core / earth 450V
Cut-off frequency 2 MHz
Mounting other
Connection 1 Clamp
SPD no
With telecommunication contact no
Signaling on the device without
Explosion-tested version no

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Overvoltage protection - Surge protection for signal systems S-PT-1X2-24DC-1/2"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.