Interface converter - Signal converter GW EIP/ASCII 2E/4DB9

Phoenix - GW EIP/ASCII 2E/4DB9 - Interface converter - Signal converter GW EIP/ASCII 2E/4DB9
Photo source: fig. possibly similar
Photo source: fig. possibly similar
GW EIP/ASCII 2E/4DB9 2702776 4055626339436 EAN/GTIN DE 50738265 WEEE

¥8,233.36 excl. VAT

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Interface converter GW EIP/ASCII 2E/4DB9 service primary side other, connection type primary side... more
Interface converter - Signal converter GW EIP/ASCII 2E/4DB9 – Phoenix – 2702776 – 4055626339436: Interface converter GW EIP/ASCII 2E/4DB9 service primary side other, connection type primary side D-Sub connector 9-pin, service secondary side RS-232, connection type secondary side other, bidirectional, overcurrent protection, galvanic isolation active, nominal current consumption 100mA, the GW EIP/ASCII. .. converts serial RAW or ASCII strings to EtherNet/IP. Includes two RJ45 connectors and four D-SUB 9 connectors.
... more
Number of HW interfaces Industrial Ethernet 2
With optical interface no
IO-Link master no
Redundancy no
With electrical isolation no
Suitable for safety functions no
Associated equipment (Ex ia) no
Associated equipment (Ex ib) no
Explosion protection category for gas other
Explosion protection category for dust other
Width 45 mm
Height 99 mm
Depth 115 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Interface converter - Signal converter GW EIP/ASCII 2E/4DB9"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.