Surge protection device type 1/2 - Lightning arrest for power supply 5kA VALMST1T2600DCPV2+V

Phoenix - VALMST1T2600DCPV2+V - Surge protection device type 1/2 - Lightning arrest for power supply 5kA VALMST1T2600DCPV2+V
Photo source: fig. possibly similar
Photo source: fig. possibly similar
VALMST1T2600DCPV2+V 2801163 4046356714303 EAN/GTIN DE 50738265 WEEE

Our best price
¥1,169.15 excl. VAT
¥2,117.89 (-44.8% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Surge protection device type 1/2 VALMST1T2600DCPV2+V lightning impulse current (10/350 µs) 5kA,... more
Surge protection device type 1/2 - Lightning arrest for power supply 5kA VALMST1T2600DCPV2+V – Phoenix – 2801163 – 4046356714303: Surge protection device type 1/2 VALMST1T2600DCPV2+V lightning impulse current (10/350 µs) 5kA, nominal discharge current (8/20) 15kA, maximum continuous voltage AC 0V, maximum continuous voltage DC 720V, nominal voltage DC 600V, protection level 2.6kV, mounting type DIN rail TH35, Size 3 HP, max. conductor cross-section, solid (solid/stranded) 35mm², max. conductor cross-section, flexible (finely stranded) 25mm², optical signaling on the device, test class type 1, lightning current / overvoltage arrester for 2-pole isolated DC voltage systems 600 V DC, for DIN rail mounting , 3-pin base element, three pluggable, temperature-controlled protective elements, status message on each plug.
... more
Lightning impulse current (10/350 µs) 5 kA
Nominal discharge current (8/20) 15 kA
Highest continuous voltage AC 0 V
Highest continuous voltage DC 720V
Rated voltage DC 600V
Protection level 2.6 kV
Mounting other
Size other
With telecommunication contact no
Blow out no
Signaling on the device optical
Test class type 1 yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device type 1/2 - Lightning arrest for power supply 5kA VALMST1T2600DCPV2+V"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.