Surge protection device type 1/2 - Lightning arrest for power supply 5kA VAL-MS-T1/T #2801160

Phoenix - VAL-MS-T1/T #2801160 - Surge protection device type 1/2 - Lightning arrest for power supply 5kA VAL-MS-T1/T #2801160
Photo source: fig. possibly similar
Photo source: fig. possibly similar
VAL-MS-T1/T #2801160 2801160 4046356714334 EAN/GTIN DE 50738265 WEEE

Our best price
¥1,168.33 excl. VAT
¥2,116.56 (-44.8% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Overvoltage protection device type 1/2 VAL-MS-T1/T 2801160 lightning impulse current (10/350 µs)... more
Surge protection device type 1/2 - Lightning arrest for power supply 5kA VAL-MS-T1/T #2801160 – Phoenix – 2801160 – 4046356714334: Overvoltage protection device type 1/2 VAL-MS-T1/T 2801160 lightning impulse current (10/350 µs) 5kA, nominal discharge current (8/20) 15kA, maximum continuous voltage DC 1050V, nominal voltage DC 875V, protection level 3.5kV, mounting type DIN rail TH35 , size 3 HP, max. conductor cross-section solid (single/stranded) 35mm², max. conductor cross-section flexible (finely stranded) 25mm², optical signaling on the device, test class type 1, lightning current / surge arrester for 2-pole isolated DC voltage systems 1000 V DC, for DIN rail mounting, 3-pole base element, three pluggable, temperature-controlled protective elements, status message on each connector.
... more
Lightning impulse current (10/350 µs) 5 kA
Nominal discharge current (8/20) 15 kA
Highest continuous voltage DC 1050V
Rated voltage DC 875V
Protection level 3.5 kV
Mounting other
Size other
With telecommunication contact no
Blow out no
Signaling on the device optical
Test class type 1 yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Surge protection device type 1/2 - Lightning arrest for power supply 5kA VAL-MS-T1/T #2801160"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.