Lightning current arrester type 1/2 - Lightning arrest for power supply 35kA PWT 35-800AC-FM

Phoenix - PWT 35-800AC-FM - Lightning current arrester type 1/2 - Lightning arrest for power supply 35kA PWT 35-800AC-FM
Photo source: fig. possibly similar
Photo source: fig. possibly similar
PWT 35-800AC-FM 2800419 4046356556156 EAN/GTIN DE 50738265 WEEE

¥2,207.74 excl. VAT
¥4,210.13 (-47.56% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Lightning current / surge arrester type 1/2 PWT 35-800AC-FM IT system type, TN-C system type,... more
Lightning current arrester type 1/2 - Lightning arrest for power supply 35kA PWT 35-800AC-FM – Phoenix – 2800419 – 4046356556156: Lightning current / surge arrester type 1/2 PWT 35-800AC-FM IT system type, TN-C system type, lightning impulse current (10/350 µs) 35kA, nominal discharge current (8/20) 35kA, maximum continuous voltage AC 800V, maximum continuous voltage DC 30V , nominal voltage AC 690V, protection level 4.5kV, follow current extinguishing capacity 50kA, type of installation other, size 3 MW, max. conductor cross-section rigid (solid/stranded) 50mm², max Type 1, lightning current / surge arrester, according to Type 1/2 / Class I/II, for 1-phase power supply networks with combined PE and N in one conductor (L1, PEN).
... more
Network form DC no
Network form IT yes
Mains form TN-C yes
Lightning impulse current (10/350 µs) 35 kA
Nominal discharge current (8/20) 35 kA
Highest continuous voltage AC 800V
Highest continuous voltage DC 30 V
Rated voltage AC 690V
Protection level 4.5 kV
Follow current extinguishing capability 50 kA
Mounting other
Size other
With telecommunication contact yes
Blow out no
Signaling on the device optical
Test class type 1 yes

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Lightning current arrester type 1/2 - Lightning arrest for power supply 35kA PWT 35-800AC-FM"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.