CombiController V50 1+1 in the housing - Combined arrester for power systems VG-V50-1+NPE-280

OBO - VG-V50-1+NPE-280 - CombiController V50 1+1 in the housing - Combined arrester for power systems VG-V50-1+NPE-280
Photo source: fig. possibly similar
Photo source: fig. possibly similar
VG-V50-1+NPE-280 5093594 4012196423217 EAN/GTIN DE 64419409 WEEE

¥1,519.10 excl. VAT
¥2,961.28 (-48.7% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
CombiController V50 1+1 in the housing VG-V50-1+NPE-280 TN system type, TN-C system type, TN-CS... more
CombiController V50 1+1 in the housing - Combined arrester for power systems VG-V50-1+NPE-280 – OBO – 5093594 – 4012196423217: CombiController V50 1+1 in the housing VG-V50-1+NPE-280 TN system type, TN-C system type, TN-CS system type, TN-S system type, TT system type, number of poles 1, lightning impulse current (10/350 µs) 12.5kA , maximum continuous voltage AC 280V, maximum continuous voltage DC 350V, nominal voltage AC 230V, protection level 1.3kV, protection level LN 1.3kV, protection level N-PE 1.3kV, follow current extinguishing capability 0.1kA, max. conductor cross-section solid (solid/stranded) 35mm² , Max. conductor cross-section flexible (finely stranded) 35mm², type of installation pre-assembled in the housing, size other, optical signaling on the device, test class type 1 and 2, system solution for lightning current and overvoltage protection of AC systems. The V50 combined lightning current arrester made of halogen-free plastic is suitable for lightning protection equipotential bonding according to VDE 0185-305 (IEC 62305). The modular, pluggable arresters are characterized by a dynamic disconnect device and an optical status display. The NPE variant is also equipped with a heavy-duty spark gap between the neutral and protective conductors. The CombiController is particularly suitable for lightning protection equipotential bonding for buildings of lightning protection class III and IV. The lightning current discharge capacity is 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total. The vibration-proof latching and the voltage and type coding ensure safety and avoid mixing up upper and lower parts. The wedge-shaped design of the contacts makes it easy to insert and even easier to remove the upper parts. Additional technical product information can be called up quickly and easily using the QR code on the rating plate using mobile devices.
... more
Network shape TN yes
Mains form TN-CS yes
Mains form TN-S yes
Network shape TT yes
Nominal discharge current (8/20) 30 kA
Max. Surge current (8/20) 50 kA
Rated voltage AC 230V
Highest continuous voltage AC 280V
Highest continuous voltage DC 350V
Protection level 1.3 kV
Protection level LN 1.3 kV
Integrated backup fuse no
Mounting in the case
Size other
Signaling on the device optical
IP protection) IP66

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "CombiController V50 1+1 in the housing - Combined arrester for power systems VG-V50-1+NPE-280"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.