Inverter AC Pn:250-355kW, IP00 - Frequency converter 380...500V FR-A840-06830-E2-60

Mitsubishi - FR-A840-06830-E2-60 - Inverter AC Pn:250-355kW, IP00 - Frequency converter 380...500V FR-A840-06830-E2-60
Photo source: fig. possibly similar
FR-A840-06830-E2-60 297589 DE 92841400 WEEE

¥145,268.14 excl. VAT

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Inverter AC Pn:250-355kW, IP00 FR-A840-06830-E2-60 Mains voltage 380 ... 500V, mains frequency... more
Inverter AC Pn:250-355kW, IP00 - Frequency converter 380...500V FR-A840-06830-E2-60 – Mitsubishi – 297589: Inverter AC Pn:250-355kW, IP00 FR-A840-06830-E2-60 Mains voltage 380 ... 500V, mains frequency 50/60 Hz, number of input phases 3, number of output phases 3, max. output frequency 60Hz, max. output voltage 500V, nominal output current I2N 683A , Max. power output with linear load at rated output voltage 355kW, Relative symmetrical mains frequency tolerance 5%, Number of analog outputs 2, Number of analog inputs 3, Number of digital inputs 12, With control element, Can be used in industrial areas, Supports protocol for TCP/IP , supports protocol for CAN, supports protocol for MODBUS, supports protocol for DeviceNet, supports protocol for EtherNet/IP, supports protocol for BACnet, supports protocol for other bus systems, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-48 5 2, number of HW interfaces serial TTY 0, number of HW interfaces USB 2, number of HW interfaces parallel 0, number of HW interfaces other 0, with PC connection, brake chopper integrated, degree of protection (IP) IP00, Height 1010mm, width 680mm, depth 380mm, The FR-A800 series is fully backward compatible with the FR-A700 series. Parameters can be easily copied using the FR Configurator2 setup software. To accommodate the longer response times of older machines, the FR-A800's input/output signals can be delayed.
... more
Mains voltage 380..500V
Power frequency 50/60 Hz
Input phase number 3
Output phase number 3
Max. Output frequency 60 Hz
Max. Output voltage 500V
Rated output current I2N 683 A
Relative symmetric power frequency tolerance 5%
Number of analog outputs 2
Number of analog inputs 3
Number of digital inputs 12
With operating element yes
Use in the industrial sector permitted yes
Use in residential and commercial areas permitted no
Supports protocol for TCP / IP yes
Supports protocol for PROFIBUS no
Supports protocol for CAN yes
Supports protocol for INTERBUS no
Supports protocol for ASI no
Supports protocol for KNX no
Supports protocol for MODBUS yes
Supports data highway protocol no
Supports protocol for DeviceNet yes
Supports protocol for SUCONET no
Supports protocol for LON no
Supports protocol for PROFINET IO no
Supports protocol for PROFINET CBA no
Supports protocol for SERCOS no
Supports protocol for EtherNet / IP yes
Supports protocol for DeviceNet Safety no
Supports protocol for INTERBUS safety no
Supports protocol for PROFIsafe no
Supports protocol for SafetyBUS p no
Supports protocol for BACnet yes
Supports protocol for other bus systems yes
Number of HW interfaces serial RS-485 2
Number of HW interfaces USB 2
With optical interface no
With PC connection yes
Integrated brake chopper yes
IP protection) IP00
Height 1010 mm
Width 680 mm
Depth 380 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Inverter AC Pn:250-355kW, IP00 - Frequency converter 380...500V FR-A840-06830-E2-60"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.