MR-DO4 Modbus RTU Modbus module - Switch actuator for home automation 4-ch 1108361321

1108361321 4250184135661 EAN/GTIN DE 87494433 WEEE

Our best price
¥916.68 excl. VAT
¥1,294.80 (-29.2% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Modbus module MR-DO4 Modbus RTU 1108361321 Other bus systems Other, Type of installation REG,... more
MR-DO4 Modbus RTU Modbus module - Switch actuator for home automation 4-ch 1108361321 – Metz – 4250184135661: Modbus module MR-DO4 Modbus RTU 1108361321 Other bus systems Other, Type of installation REG, Width in modular units 2, Local/manual operation, With LED display, Max. number of switching outputs 4, Rated current 5A, Rated operating voltage 24 ... 24V, With Bus coupling, min. depth of the device box 60mm, protection class (IP) IP20, the Modbus module with 4 digital outputs was developed for decentralized switching tasks. It is suitable for switching electrical components, e.g. B. Motors, contactors, lamps, blinds, etc. Here, the relay contacts are to be protected by suitable load-dependent measures. The module has a manual control level with which the relays can be switched manually. The outputs can be switched via standard registers via a Modbus master. The addressing of the module, the bit rate and parity are set via 2 address switches on the front or via software. Suitable for decentralized mounting on TH35 mounting rails according to IEC 60715 in electrical distributors. Connection with screw terminals
... more
Bus system KNX no
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems other
Radio bidirectional no
Mounting REG
Width in division units 2
On-site / manual operation yes
With LED display yes
Suitable for C-load no
Max. Number of switching outputs 4
Rated current 5 A
Rated operating voltage 24V
Different phases connectable no
With bus coupling yes
Bus module removable no
Min. depth of the device socket 60 mm
Modular expansion option no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "MR-DO4 Modbus RTU Modbus module - Switch actuator for home automation 4-ch 1108361321"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.