Motor protection relay with error memory - Motor temperature monitor 1 circuits TMR-E12 mFS 2W 24UC

TMR-E12 mFS 2W 24UC 1103161322 4250184118695 EAN/GTIN DE 87494433 WEEE

Our best price
¥338.24 excl. VAT
¥716.64 (-52.8% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Motor protection relay with error memory TMR-E12 mFS 2W 24UC Number of measuring circuits 1,... more
Motor protection relay with error memory - Motor temperature monitor 1 circuits TMR-E12 mFS 2W 24UC – Metz – 1103161322 – 4250184118695: Motor protection relay with error memory TMR-E12 mFS 2W 24UC Number of measuring circuits 1, number of contacts as NC contact 0, number of contacts as NO contact 0, number of contacts as changeover contact 2, external reset possible, error storage possible, rated control supply voltage Us 24 ... 24V , height 75mm, width 22.5mm, depth 100mm, The thermistor relay is used as a protective relay for motors against thermal overload (impermissible heating). This heating can occur as a result of mechanical overload on the shaft or when the motor is operated with impermissible voltages. A PTC thermistor is used as a sensor, which is placed on the part of the motor that heats up the most when overloaded (e.g. integrated in the motor winding). The device can also be used with motors in which a thermal switch is integrated. Integrated error memory with reset button on the front, or connection of an external reset button (terminals B1 - B2). Variants: 230 V AC or 24 V AC/DC, 1 changeover contact or 2 changeover contacts
... more
Rated control supply voltage Us at DC 24V
Voltage type for actuation AC/DC
With removable clamps no
Number of measuring circuits 1
Error storage possible yes
External reset possible yes
Number of contacts as changer 2
Width 22.5 mm
Height 75 mm
Depth 100 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Motor protection relay with error memory - Motor temperature monitor 1 circuits TMR-E12 mFS 2W 24UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.