Interface module - Signal converter PTi 24VAC/DC

Interface module - Signal converter PTi 24VAC/DC – Metz – 11050108 – 4250184122180: Interface module PTi 24VAC/DC Connection type primary side other, Connection type secondary side other, Overcurrent protection, Galvanic isolation passive, The potential isolator / signal converter is used to separate analog signals in the range from 0 to 10 V DC and 0 to 20 mA DC or to convert signals from 0 to 10 V DC to 0 to 20 mA DC or 0 to 20 mA DC to 0 to 10 V DC. The input and output signals as well as the supply voltage are electrically isolated from one another. An input signal of 0 to 10 V or 0 to 20 mA can be connected to the device. Potential isolation function: With the PT-C12, the input signal 0 to 10 V is proportionally adjusted to the output signal 0 to 10 V. The PTi-C12 adjusts the input signal 0 to 20 mA proportionally to the output signal 0 to 20 mA. Signal conversion function with electrical isolation: With a signal conversion from 0 to 10 V to 0 to 20 mA or 0 to 20 mA to 0 to 10 V, the converted output signal can be readjusted using the integrated spindle trimmer. In addition, a manual emergency operating level with a HAND-AUTO switch with feedback contact is integrated. The output signal 0 to 10 V or 0 to 20 mA can be set using the front potentiometer in the HAND switch position. A constant output voltage of max. 10 V DC, 5 mA is available at the 10 V terminal. The input Y is used for the LED display of the output voltage Ua. The brightness of the LED depends on the level of the output signal (bridge between Ua and Y). Alternatively, an external signal can be connected to input Y for the LED display of 0 to 10 V DC. Connection with screw terminals