KNX ARGUS presence with light control+IR rec - KNX movement sensor 630919

KNX ARGUS presence with light control+IR rec - KNX movement sensor 630919 – Merten – 4042811072216: KNX ARGUS presence m.Lichtregel+IR-Remp 630919 bus system KNX, other bus systems without, design presence detector, mounting type flush-mounted, material plastic, material quality other, surface untreated, design of the surface matt, color white, RAL number (similar) 9010, with Bus coupling, protection against creeping under/rear field monitoring, stairwell monitoring, response brightness adjustable, optimum installation height 2.5m, max. range to one side 7m, max. range in front 7m, detection field diameter on the floor 14m, horizontal detection angle 0 ... 360°, number of channels 6 , number of binary inputs 0, min. duty cycle 1s, max. duty cycle 15300min, min. depth of device box 46mm, presence detection indoors. If the KNX ARGUS Presence detects small movements in the room, data telegrams are sent via KNX, e.g. to control lighting, blinds or heatingxx With brightness-dependent motion detection for lighting control, the device constantly checks the brightness in the room. If there is sufficient natural light, the device switches off the artificial light even if a person is present. The run-on time can be set via the ETS. The light control enables a desired brightness in the room to be permanently achieved. The brightness is kept constant by dimming and optionally by switching a second lighting group. Individual configurations of the ARGUS Presence can be changed or other KNX devices can be remotely controlled via the IR receiver. With integrated bus coupler. For ceiling mounting in a 60 mm socket, optimal use at 2.5 m. Can also be mounted on ceilings with the surface-mounted housing for ARGUS presence. KNX software functions: Five movement/presence blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytexx In addition, a light control block: The brightness can be kept constant by dimming and a switchable additional stage. IR receiver function. IR configuration: Setting the brightness threshold, the staircase lighting time factor or the range. Normal operation, master, slave, monitoring, security pause, locking function. Four motion sensors: Sensitivity and range can be set separately for each sensor. Learnable staircase lighting time. Actual brightness value: Can be recorded via the internal and/or an external light sensor. actual value correction. Detection angle: 360 degrees. Range: Radius of max. 7 m (at a mounting height of 2.50 m). Number of levels: 6. Number of zones: 136 with 544 switching segments. Number of motion sensors: 4, separately adjustable. Light sensor: internal light sensor continuously adjustable from approx. 10 to 2000 lux (ETS), external light sensor via KNX. Number of IR channels: 10 for control of KNX devices, 10 for configuration. EC directives: Low Voltage Directive 2006/95/EG and EMC Directive 2004/108/EG. Transmitter: IR universal remote control MEG5761-0000. Wireless universal remote control CONNECT MEG5051-0000. Accessories: Surface-mounted housing for ARGUS Presence 550619. Scope of delivery: With bus connection terminal and support plate. Colour: polar white.