Fan - Two-way industrial fan 300mm EZF 30/6 B

Fan - Two-way industrial fan 300mm EZF 30/6 B – Maico – 0085.0053 – 4012799850533: Fan EZF 30/6 B mains frequency 50Hz, rated voltage 230V, conveyor temperature -20... 60°C, volume flow 1100m³/h, speed 9301/min, protection class (IP) IP55, ventilation version, nominal width 300mm, shutter without, For flush mounting. Installation possible in any position. Wall sleeve made of galvanized sheet steel. 8-blade impellers made of glass fiber reinforced polyamide. Dynamically balanced in 2 levels, in accordance with quality level 6.3, DIN ISO 1940, Part 1. Plastic protective grille on the suction side, pearl white, contact protection in accordance with DIN EN ISO 13857. Conveying direction: The following figure shows the conveying direction. Conveying direction A: Suctioning via the motor, standard, Conveying direction B: Blowing via the motor, available on request, direction of rotation, reversing operation: The volume flow decreases by approx. 35% with an abnormal conveying direction. Motor: asynchronous motor. Reversible. Exception: Fans with shaded-pole motors (...-E). Not suitable for pumping air saturated with water vapor. AC motor: EZF series. Rated voltage 230 V, 50 Hz. Thermal overload protection as standard. Fans.. /B: Capacitor motors with operating capacitor on the protective grille or on the wall sleeve. Protection class IP 55. Fans.. /D: Capacitor motors with operating capacitor in the connection box. Protection class IP 54. Fans.. /E: Shaded pole motors, not reversible. Protection class IP 54. Electrical connection: To the terminal strip in the end cover of the motor. Safety instructions: With free suction, the fan may only be put into operation if the impeller is protected against contact in accordance with DIN EN ISO 13857. Article: EZF 35/4 B, version: wall sleeve, delivery volume: 2760 m3/h, nominal delivery volume: 1938 m3 /h / in opt. Efficiency, pressure pfs, nominal: 57 Pa - in opt. Efficiency, speed nnominal: 1455 1/min - in opt. Efficiency, speed: 1461 1/min, impeller type: axial, speed controllable: yes, reversibility: yes, voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, nominal power: 120 W, Inominal: 0.45 A, IMax: 0 .75 A, protection class: IP 55, thermal class: B, power supply cable: 3 / 1.5 mm2 location: wall / ceiling, installation type: flush-mounted, installation position: horizontal / vertical, material: sheet steel, galvanized, weight: 7.4 kg, Nominal width: 350 mm, width: 428 mm, height: 428 mm, depth: 300 mm, conveyor temperature at nominal current: 60 °C, conveyor temperature at IMax: -20 °C to 60 °C, closure flap: without