Fan 1100cbm/h,65Wm,IP55 - Two-way industrial fan 200mm EZQ 20/2 B

Fan 1100cbm/h,65Wm,IP55 - Two-way industrial fan 200mm EZQ 20/2 B – Maico – 0083.0102 – 4012799831020: Fan 1100cbm/h, 65Wm, IP55 EZQ 20/2 B, mains frequency=50 Hz, rated voltage=230 V, medium temperature=-20..60 °C, volume flow=1100 m³/h, speed=2850 1/min, protection class ( IP) = IP55, version = ventilation, nominal width = 200 mm, closure flap = without, protective grille on the suction side, yellow chromated, contact protection according to DIN EN ISO 13857. 8-blade impellers made of glass fiber reinforced polyamide. Dynamically balanced in 2 levels, in accordance with quality level 6.3, DIN ISO 1940, Part 1. Installation possible in any position. Conveying direction: The following figure shows the conveying direction: Conveying direction A: Suction via the motor, standard. Conveying direction B: Blowing via the motor, on request. Direction of rotation, reversing operation: The volume flow decreases by approx. 35% if the conveying direction is abnormal. Motor: asynchronous motor. Speed controllable. Exception: Type EZQ 45/6 B, EZS 45/6 B, DZQ 40/2 B and DZS 40/2 B. Reversible. Exception: Fans with shaded-pole motors (...-E). Not suitable for pumping air saturated with water vapor. AC motor: EZQ and EZS series. Rated voltage 230 V, 50 Hz. Thermal overload protection as standard. Fans ../B: Capacitor motors with operating capacitor on the protective grille or on the wall sleeve, protection class IP 55. Fans ../D: Capacitor motors with operating capacitor in the connection box, protection class IP 54. Fans ../E: Shaded pole motors, not reversible, protection class IP 54 .Electrical connection: To the terminal strip in the end cover of the motor. Safety instructions: The fan may only be put into operation if the impeller is protected against contact in accordance with DIN EN ISO 13857. Article: EZQ 20/2 B, version: square wall plate, delivery volume: 1100 m3/h, speed: 2850 1/min, impeller type: axial, speed controllable: yes, reversibility: yes, voltage type: alternating current, rated voltage: 230 V, mains frequency: 50 Hz, nominal power: 65 W, Irated: 0.3 A, IMax: 0.47 A, protection class: IP 55, thermal class: B, installation location: wall / ceiling, installation type: surface-mounted, installation position: horizontal / vertical, material: sheet steel , galvanized, weight: 5.5 kg, nominal width: 200 mm, width: 345 mm, height: 345 mm, depth: 238 mm, conveyor temperature at nominal current: 60 °C, conveyor temperature at IMax: -20 °C to 60 °C , Closure flap: without