Centrifugal duct fan 115W, 900cbm/h, IPX4 - Duct fan 840m³/h ERR 20/1

Maico - ERR 20/1 - Centrifugal duct fan 115W, 900cbm/h, IPX4 - Duct fan 840m³/h ERR 20/1
Photo source: fig. possibly similar
Photo source: fig. possibly similar
ERR 20/1 0080.0275 4012799802754 EAN/GTIN DE 78107228 WEEE

Our best price
¥1,710.02 excl. VAT
¥2,528.72 (-32.38% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Centrifugal tube fan 116W, 840m³/h, IPX4 ERR 20/1 Material of the housing Steel, treated, air... more
Centrifugal duct fan 115W, 900cbm/h, IPX4 - Duct fan 840m³/h ERR 20/1 – Maico – 0080.0275 – 4012799802754: Centrifugal tube fan 116W, 840m³/h, IPX4 ERR 20/1 Material of the housing Steel, treated, air volume unloaded 840m³/h, connection voltage 230V, protection class (IP) IPX4, length 230mm, diameter of the housing 370mm, radial impellers with backward curved blades. Connection pieces on the suction and pressure sides, for direct installation in ventilation pipes. Mounting foot available as an accessory. Conveying direction: The conveying and rotation directions are marked by arrows on the fan housing. Motor: external rotor capacitor motor. Operating capacitor ready for connection in the terminal box. Speed controllable. Thermal overload protection as standard. Robust motor with ball bearings, maintenance-free. Protection class IP X4 when installed in ventilation ducts with at least 1 m pipe on the suction and pressure sides. Installation instructions: Installation possible in any position. To avoid vibration transmission to the pipe system, use elastic sleeves ELR. Electrical connection: External terminal box with cable entry grommet. Safety instructions: Only operate the fan with free suction or exhaust if the impeller is protected against contact in accordance with DIN EN ISO 13857. To do this, attach the SGR protective grille. Article: ERR 20/1, delivery volume: 840 m3/h, speed: 2611 1/min, impeller type: radial, speed controllable: yes, energy efficiency class: F, voltage type: alternating current, rated voltage: 230 / 220 V, mains frequency: 50 Hz / 60 Hz, nominal power: 116 W, IMax: 0.5 A, protection class: IP 370 mm, height: 407 mm, depth: 230 mm, conveyor temperature at nominal current: -20 °C to 60 °C, conveyor temperature at IMax: -20 °C to 60 °C, DC motor: false
... more
Material of the housing stainless steel
Air volume unloaded 840 m³/h
Supply voltage 230V
DC motor no
IP protection) IPX4
Length 230 mm
Housing diameter 370 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Centrifugal duct fan 115W, 900cbm/h, IPX4 - Duct fan 840m³/h ERR 20/1"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.