Universal LED series touch dimmer - Dimmer flush mounted 20...210VA 1712DE

1712DE 4011377166929 EAN/GTIN DE 64244154 WEEE

Our best price
¥788.24 excl. VAT
¥1,386.71 (-43.16% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Universal LED 1712DE series touch dimmer, composition of the basic element, push button... more
Universal LED series touch dimmer - Dimmer flush mounted 20...210VA 1712DE – Jung – 4011377166929: Universal LED 1712DE series touch dimmer, composition of the basic element, push button operation, phase control dimming, phase cut dimming, universal load type, extension input, light value memory, can be used with a button, can be used with a motion detector, can be used with a presence detector, can be used with a time switch/timer, flush-mounted installation type, claw/ Screw fastening, other material, other material quality, halogen-free, nominal voltage 230... 230V, frequency 50... 60Hz, nominal power 20... 210VA, connection type screw terminal, core cross-section 0.5... 4mm², universal LED series touch dimmer, insert , with extension input, rated voltage: AC 230 V ~, mains frequency: 50/60 Hz, standby power (depending on the attachment): approx. 0.1 to 0.5 W, power loss: approx. 4 W, device works according to the phase - or trailing edge principle, device can be operated without a neutral conductor, automatic or manual setting of the dimming principle suitable for the load, LED display of the set B Operating mode, switch on by soft start that protects the lamp, switch on with the last brightness setting or saved switch-on brightness, switch-on brightness can be saved permanently, minimum brightness can be saved permanently, electronic short-circuit protection with permanent switch-off after 7 seconds at the latest, electronic over-temperature protection, test mode for functional testing, two independent outputs for two lighting groups, connected load per Output at 25 °C: incandescent lamps: 20 to 210 W, HV halogen lamps: 20 to 210 W, HV LED lamps dimmable: typically 3 to 50 W, compact fluorescent lamps dimmable: typically 3 to 50 W, electronic transformers: 20 to 210 W, electronic transformers with LV-LED 20 to 50 W, inductive transformers: 20 to 210 VA, inductive transformers with LV-LED 20 to 50 VA, when operating in LED trailing edge operating mode: connected load for HV-LED lamps: typically 3 up to 100 W, electronic transformers with LV-LED: typically 20 to 100 W, ohmic-capacitive: 20 to 210 W, capacitive v-inductive: not permitted, ohmic-inductive: 20 to 210 VA, ohmic and HV-LED: typically 3 to 50 W, ohmic and compact fluorescent lamps: typically 3 to 500 W, asymmetrical load distribution possible, power expansion possible through power boosters, total length of load line: maximum 100 m, connection: screw terminals, 1 x 0.5 to 4 mm² or 2 x 0.5 to 2.5 mm² (solid and flexible without ferrule) and 1 x 0.5 to 4 mm² or 2 x 0.5 to 1.5 mm² (finely stranded with ferrule), total length of extension line: maximum 100 m. Number of extensions: unlimited (extension insert 2-wire item no.: 1720 NE and button), 10 (extension insert 3-wire item no.: 1723 NE and rotary extension insert 3-wire item no.: 1733 DNE), ambient temperature: - 5 to + 45 °C, for attachments item no.:.. 1702.., for switching and dimming lighting
... more
Compilation Base element
Of operation Push button
App control via Bluetooth no
Dimming Phase control yes
Dimming Phase section yes
Series dimmer yes
Load type universal
Extension input yes
Light value memory yes
Suitable with button yes
Usable with motion detector yes
Suitable with presence detector yes
Usable with timer / timer yes
Suitable with radio button yes
Usable with IR button no
Mounting Flush
Mounting Claw/screw fastening
Material other
Material quality other
Halogen free yes
Nominal voltage 230V
Frequency 50..60 Hz
Connection Screw terminal
Core cross-section 0.5..4 mm²
Min. depth of the device socket 38 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Universal LED series touch dimmer - Dimmer flush mounted 20...210VA 1712DE"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.