Radio actuator 1-channel, REG - Switch actuator for bus system 1-ch FM AS 16 REG

Radio actuator 1-channel, REG - Switch actuator for bus system 1-ch FM AS 16 REG – Jung – 4011377087521: Radio actuator 1-channel, REG FM AS 16 REG bus system radio bus, other bus systems eNet, radio bidirectional, mounting type REG, width in division units 2, local/manual operation, max. switching power 2300W, output power 2300W, suitable for C load, Max. number of switching outputs 1, Max. switching current 16A, rated operating voltage 230 ... 230V, with bus coupling, REG housing 2 HP new system function: fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Intended use Switching lighting Operation with suitable eNet radio transmitters operation with power supply 12 V REG (item no. NT 1220 REG VDC) and eNet radio reception module REG (item no. FM FK 32 REG) or eNet server mounting on top-hat rail according to DIN EN 60715 in sub-distribution Product features Operating mode switch for switching/button actuator switching or parameterization via eNet server Status feedback to radio transmitter Scene operation possible Output can be switched with the Prog button Status display with LED Switching mode: Switch-on telegram: Device switches on Switch-off telegram: Device switches off Switching mode: The relay contact remains closed as long as on - or switch-off telegrams can be received The maximum switch-on time is 60 seconds Can be set with eNet server: Flashing function Follow-up time On/off switch-on delay Normally open or normally closed operation Switch-off warning Minimum switching repetition time Operating locks Permanent on, permanent off Additional functions with eNet server: Fully encrypted radio transmission (AES-CCM ) from eNet server software version 2.0 Update of the device software Read out error memory Nominal voltage: AC 230 V ~, 50/60 Hz Ambient temperature: -5 ... +45 °C Switching current at AC 230 V ~ Ohmic: 16 A With switching current >, 10 A connecting cable 2.5 mm2 Fluorescent lamps: 4 AX Contact type: µ Standby power: max. 0.2 W Connected load Incandescent lamps: 2300 W HV halogen lamps: 2000 W Electronic transformers: 1500 W HV LED lamps: typ. 500 W Compact fluorescent lamps: typ 500 W Inductive transformers: 1000 VA Fluorescent lamps uncompensated: 920 VA Capacitive load: 690 VA (560 µF) Connection outputs Connection type: screw terminals solid: 1 x 1.5 ... 4 mm2 fine-wired without ferrule: 1 x 0.75 .. 4 mm2 fine-stranded with ferrule: 1 x 0.5 ... 2.5 mm2 Installation width: 36 mm (2 HP) Bus cable Nominal voltage: DC 12 V SELV Current consumption: max. 20 mA Bus connection: Connection terminal Cable length: max. 3 m