eNet radio dimming actuator 1-gang, Mini, UP - Dimmer flush mounted FM UD 20250 UP

FM UD 20250 UP 4011377086876 EAN/GTIN DE 64244154 WEEE

Our best price
¥791.06 excl. VAT
¥1,165.65 (-32.14% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
eNet radio dimming actuator 1-gang, Mini, UP FM UD 20250 UP Compilation of basic element, radio... more
eNet radio dimming actuator 1-gang, Mini, UP - Dimmer flush mounted FM UD 20250 UP – Jung – 4011377086876: eNet radio dimming actuator 1-gang, Mini, UP FM UD 20250 UP Compilation of basic element, radio operating mode, phase control dimming, phase control dimming, load type universal, light value memory, mounting type flush-mounted, mounting type other, material plastic, halogen-free, nominal voltage 230 ... 230V, frequency 50 ... 60Hz, connection type screw terminal, wire cross section 0.75 ... 4mm², new system function: fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Intended use Switching and dimming of incandescent lamps, HV halogen lamps, electronic transformers for halogen or LED lamps, dimmable inductive transformers for halogen or LED lamps, HV LED or compact fluorescent lamps Operation with suitable eNet radio transmitters Installation in a device box with dimensions according to DIN 49073 in combination with a suitable cover Installation in a surface-mounted housing or installation adapter (Art.- No. FM-EBG) for false ceilings Product features Switching on using a lamp-friendly soft start Switch-on brightness can be saved permanently Minimum brightness can be saved permanently Scene operation possible Status display with LED Status feedback to radio transmitter Can be switched with the Prog button Electronic short-circuit protection with permanent switch-off after 7 seconds at the latest Electronic over-temperature protection Automatic or manual setting to suit the load Dimming principle Power expansion through power additives (Art. no. ULZ 1755 REG) possible Optional accessories: Compensation module LED, item no.: KM LED 230 U Adjustable with eNet server: Maximum brightness Dimming speed On/off delay Dimming up/down ramp Switch-off warning Control locks Permanent on, permanent off Hotel function Follow-up time Additional functions with eNet server: Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Update of the device software Repeater function Read out error memory Nominal voltage: AC 230 V ~, 50/60 Hz Power loss: max. 1.5 W Standby power: max. 0.5 W Ambient temperature: -25 ... +70 °C Connected load at 45 °C Performance information including transformer power loss. Operate inductive transformers with at least 85% nominal load. With ohmic-inductive mixed load, max. 50% share of ohmic load. Otherwise the dimmer may be incorrectly calibrated. Incandescent lamps: 20 ... 250 W HV halogen lamps: 20 ... 250 W Electronic transformers: 20 ... 250 W Electronic transformers with LV LED: typ. 20 ... 100 W Inductive transformers: 20 ... 250 VA inductive transformers with LV LED: typ. 20 ... 100 VA HV LED lamps dimmable: typ. 3 ... 70 W Compact fluorescent lamps dimmable: typ. 3 ... 70 W ohmic-inductive: 20 ... 250 VA ohmic-capacitive: 20 ... 250 W capacitive-inductive: not permitted ohmic and HV-LED: typ. 3 ... 70 W ohmic and compact fluorescent: typ. 3 ... 70 W power reduction per 5 °C Exceeding 45 °C: -5% when installed in wooden or drywall: -15% when installed in multiple combinations: -20% Additional power: see instructions for additional power Connection type: Screw terminals solid: 1 x 0.75 ... 4 mm2 fine-wire with Ferrule: 1 x 0.75 ... 2.5 mm2 Contact type: e Total length of load cable: max. 100 m Dimensions (Ø x H): 53 x 28 mm Radio frequency: 868.0 ... 868.6 MHz Transmission power: max 20 mW transmission range in free field: typically 100 m Receiver category: 2
... more
Compilation Base element
Of operation Radio
App control via Bluetooth no
Dimming Phase control yes
Dimming Phase section yes
Series dimmer no
Load type universal
Light value memory yes
Suitable with button no
Usable with motion detector no
Suitable with presence detector no
Usable with timer / timer no
Mounting Flush
Mounting other
Material Plastic
Halogen free yes
Nominal voltage 230V
Frequency 50..60 Hz
Connection Screw terminal
Core cross-section 0.75..4 mm²

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "eNet radio dimming actuator 1-gang, Mini, UP - Dimmer flush mounted FM UD 20250 UP"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.