LED touch dimmer standard - Dimmer flush mounted 20...210VA 1710 DE

LED touch dimmer standard - Dimmer flush mounted 20...210VA 1710 DE – Jung – 4011377166905: LED touch dimmer standard 1710 DE Composition of basic element, push button operating mode, dimming leading edge, dimming trailing edge, universal load type, light value memory, can be used with button, can be used with motion detector, can be used with presence detector, can be used with time switch/timer, can be used with radio button, flush-mounted installation type, claw attachment type -/screw fastening, other material, other material quality, halogen-free, rated voltage 230 ... 230V, frequency 50 ... 60Hz, rated power 20 ... 210VA, connection type screw terminal, core cross-section 0.5 ... 4mm², touch dimmer standard LED, insert , Nominal voltage: AC 230 V ~, mains frequency: 50/60 Hz, standby power: approx. 0.25 W, power loss: approx. 2 W, device works according to the leading edge or trailing edge principle, device can be operated without a neutral conductor, automatic or manual setting of the dimming principle suitable for the load, LED display of the set operating mode, switching on with lamp-friendly soft start, on switch with the last set brightness or saved switch-on brightness, switch-on brightness can be saved permanently, minimum brightness can be saved permanently, electronic short-circuit protection with permanent switch-off after 7 seconds at the latest, electronic overtemperature protection, test mode for functional testing, connected load at 25 °C: Incandescent lamps: 20 to 210 W, HV halogen lamps : 20 to 210 W, HV LED lamps dimmable: typically 3 to 60 W, compact fluorescent lamps dimmable: typically 3 to 60 W, electronic transformers: 20 to 210 W, electronic transformers with LV LEDs 20 to 60 W, inductive transformers: 20 to 210 VA, inductive transformers with LV-LED 20 to 60 VA, when operating in the LED trailing edge operating mode, the connected load for HV-LED lamps and electronic transformers with LV-LED, ohmic-capacitive: 20 to 210 W, capacitive-inductive: not permitted, ohmic-inductive: 20 to 210 VA, ohmic and HV-LED: typically 3 to 60 W, ohmic and compact fluorescent lamps: typically 3 up to 60 W, power can be expanded using power boosters, total length of load line: maximum 100 m, connection: screw terminals, 1 x 0.5 to 4 mm² or 2 x 0.5 to 2.5 mm² (solid and flexible without ferrule) and 1 x 0 .5 to 4 mm² or 2 x 0.5 to 1.5 mm² (finely stranded with ferrule), ambient temperature: - 5 to + 45 °C, for attachments item nos.: ..1700.., ..1700 P .., ..1701.., ..1701 P.., ..1750 D.., ..1751 BT.., ..1751 PBT.., ..17180.., ..17280.., . .17181.., ..17281.. and DWPM 17360.., for switching and dimming lighting