Hauff

The eibabo® technology store is your online specialist market for electrical installations and offers you the full range to meet all installation requirements for a project. When planning and installing electrical systems, the cables and lines to be laid almost always have to be distributed within a building. Or the installation must first be placed inside the building, and in some cases out again to reach, for example, the garage, the barbecue area, a shed or the lighting in the driveway. For all these tasks, it is often necessary to use special cable ducts, pipe ducts, house entries or house designs in order to be able to comply with certain structural conditions. Hauff-Technik from Hermaringen in Baden-Württemberg has made a name for itself in this field and is one of the leading European manufacturers of secure sealing systems in and on the house - regardless of whether it is a single-family house or an infrastructure project such as an airport or power plant . Thus, the customer base is made up of a wide variety of trades. Energy suppliers, municipal utilities, construction companies, industrial companies, architects, planners and private builders use the innovative products from Hauff-Technik GmbH & Co. KG. The systems protect against the ingress of water, gas, fire, dirt and vermin. Hauff-Technik was founded in 1955 by Werner and Hilde Hauff as an injection molding company. The actual success story of the company began in 1975 with the first industrially manufactured cable bushing. Today it employs over 450 people and is also internationally active with subsidiaries in Germany, Switzerland and the United Arab Emirates. In the eibabo® shops from eibmarkt® you will find press seals, sealing sets, dowel flanges and builder's packages from the Hauff brand.

Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 6
No results were found for the filter!
RECOMMENDED
3D
RECOMMENDED
3D
RECOMMENDED
3D
RECOMMENDED
3D
Hauff - HRD 125-SG-3/10-40 - Press seal standard cable - Heat-shrink wall duct HRD 125-SG-3/10-40
¥830.14 excl. VAT

*

Press seal standard cable - Heat-shrink wall duct
Hauff
| HRD 125-SG-3/10-40
RECOMMENDED
3D
RECOMMENDED
3D
RECOMMENDED
3D
Hauff - HSI150 DG 6x10-36 - split system cover - Plug for cable screw gland HSI150 DG 6x10-36
¥1,092.76 excl. VAT

*

split system cover - Plug for cable screw gland
Hauff
| HSI150 DG 6x10-36
RECOMMENDED
3D
RECOMMENDED
3D
RECOMMENDED
RECOMMENDED
3D
Press seal standard - Heat-shrink wall duct 2700106500
¥1,176.93 excl. VAT

*

Press seal standard - Heat-shrink wall duct
Hauff
| 2700106500
RECOMMENDED
1 From 6
Viewed from you