Multi-sensor relay - Weather sensors MSR12-UC

MSR12-UC 22500501 4010312205327 EAN/GTIN DE 30298319 WEEE

Our best price
¥467.95 excl. VAT
¥814.32 (-42.53% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Multi-sensor relay MSR12-UC Type of mounting DIN rail, weather sensor function, presence... more
Multi-sensor relay - Weather sensors MSR12-UC – Eltako – 22500501 – 4010312205327: Multi-sensor relay MSR12-UC Type of mounting DIN rail, weather sensor function, presence simulation, run-on function, number of channels 3, time range 5 ... 15min, wind sensor 16 ... 4m/s, rain sensor, temperature sensor 0°C, brightness sensor 1000 .. 60000lx, twilight sensor 1000 ... 60000lx, number of channels 5, control voltage 1 24 ... 24V, type of control voltage 1 DC, rated current 0.05A, rated voltage 24 ... 24V, degree of protection (IP) IP20, width in modular units 2, Width 36mm, height 62mm, depth 58mm, multifunction sensor relay UC for brightness, twilight, wind, rain and frost. Standby loss without multisensor MS only 0.5 watts. The multifunction sensor relay MSR12-UC evaluates the signals of the multisensor MS once every second and, depending on the setting of the rotary switch on the front, issues appropriate control commands to the downstream actuators. The OptoMOS semiconductor outputs switch the voltage present at the universal voltage input terminal +B1. Only 1 multisensor MS can be connected to a multifunction sensor relay MSR12-UC. However, several MSR12-UC can be connected to a multisensor MS, for example to be able to evaluate up to three points of the compass with the light sensors of the MS. The external terminating resistor must only be present with an MSR12-UC. However, it must be removed for further MSR12-UC. At the same time, the power pack supplies the multisensor MS connected to the terminals MS1, MS2, MSA and MSB, including the heating of the rain sensor surface. After the installation, wait about 1 minute for the automatic synchronization. During this time, 3 LEDs light up in regular succession.
... more
Mounting DIN rail
Function Weather sensors
Group switch no
Panic function no
Presence simulation yes
Staircase lighting and early warning no
Follow-up function, number of channels 3
Time range 5..15 min
Weekly program no
Astro program no
Wind sensor 4,32 W
Rain sensor yes
Temperature sensor 0 °C
Brightness sensor 1000..60000 lx
Twilight sensor 1000..60000 lx
Amount of channels 5
Control voltage 1 24V
Control voltage type 1 DC
Rated current 0.05A
Rated voltage 24V
IP protection) IP20
Width in division units 2
Width 36 mm
Height 62 mm
Depth 58 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Multi-sensor relay - Weather sensors MSR12-UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.