Radio transmitter module FSM61-UC

FSM61-UC 30000300 4010312300152 EAN/GTIN DE 30298319 WEEE

Our best price
¥372.95 excl. VAT
¥538.01 (-30.68% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Radio transmitter module FSM61-UC Radio frequency 868MHz, range 30m, number of commands 2, radio... more
Radio transmitter module FSM61-UC – Eltako – 30000300 – 4010312300152: Radio transmitter module FSM61-UC Radio frequency 868MHz, range 30m, number of commands 2, radio coding device, protection class (IP) IP20, other power supply, radio dual transmitter module. With internal antenna. No standby loss. For flush mounting. 45mm long, 45mm wide, 18mm deep. The radio transmitter module FSM61-UC has two channels and can thus send radio telegrams to the Eltako wireless network like a radio button. A1 initiates a wireless telegram like pressing the rocker at the top of a wireless pushbutton with a rocker and A3 like pressing the rocker at the bottom. The telegram when opening the two control contacts is identical to that of releasing the radio button. Several radio transmitter modules must not be activated at the same time. The universal control voltage at +An/-A2 processes control commands from 8 to 253V AC or 10 to 230V DC with a length of at least 0.2 seconds. Maximum parallel capacitance of the control lines at 230V 5nF. This corresponds to a length of approx. 20 meters. If terminals A1 and A3 are connected with a bridge, a radio telegram is sent from A3 once per minute as long as the control voltage is present. Eg for central commands with priority. No constant power supply required, therefore no standby loss. The rotary switch is required to activate or deactivate the encryption and is set to AUTO during operation. Activate encryption: Turn the rotary switch to the right stop (key position) and press once. Disable encryption: Turn the rotary switch to the left stop (crossed out key position) and press once.
... more
Radio frequency 868 MHz
Rolling Code System no
Reach 30 m
Number of commands 2
With radio hand transmitter no
Wireless pushbutton under plaster no
Wireless pushbutton on plaster no
With radio coding device no
IP protection) IP20
Keyboard Protector Cover no
Power supply other

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Radio transmitter module FSM61-UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.