Multifunction current switching relay FMS14

Multifunction current switching relay FMS14 – Eltako – 30014003 – 4010312313725: Multif. current switching relay incandescent lamps 2000W FMS14 bus system radio bus, other bus systems without, radio bidirectional, mounting type REG, width in modular units 1, max. switching capacity 2000W, output power 2000W, max. number of switching outputs 1, max. switching current 16A, rated current 16A, Rated operating voltage 12 ... 12V, with bus coupling, removable bus module, degree of protection (IP) IP20, multifunction impulse switching relay, 1+1 potential-free NO contact 16A/250V AC, 2000W bulbs, with DX technology. Bidirectional. Standby loss only 0.1-0.6 watts. Modular installation device for mounting on DIN rail. Connection to the Eltako RS485 bus. Bus cross-wiring and power supply with jumper. Simply connect the N conductor to terminal (N) and L to K(L). This results in an additional standby loss of just 0.1 watts. Maximum current as a sum over both contacts 16A at 230V. If the supply voltage fails, the system is switched off in a defined manner. If the 2 relays of the FMS14 are switched on, 0.6 watts are required. The sensors are taught in with the top and middle rotary switches. For normal operation, the middle rotary switch is then set to AUTO and the lower rotary switch to the desired function. The LED under the upper rotary switch accompanies the teach-in process according to the operating instructions and indicates control commands during operation by flashing briefly.