Cut-off relay - Isolator relay venetian blind ETR61NP-230V+FK

Cut-off relay - Isolator relay venetian blind ETR61NP-230V+FK – Eltako – 61100631 – 4010312205495: Isolation relay ETR61NP-230V+FK mounting type other, central input, number of connectable motors 1, nominal voltage 230V, frequency 50 ... 50Hz, isolation relay 230V with window contact FK. 1 make contact not potential-free 10A/250V AC. With window contact. Stand-by loss only 0.5 watts. For recessed installation. 45mm long, 45mm wide, 18mm deep. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Control input with internally generated low voltage 24V DC. With an isolating transformer, galvanically isolated from the power supply and the make contact (PELV). Therefore no external low voltage power supply is required. With two L-clamps and 2 N-clamps for easy and quick installation. Power supply 230V. The enclosed window contact consists of a reed relay with connection terminals and a magnet. The normally closed contact opens as soon as the magnet is closer than 25mm. Connected to terminals T1 and T2 of the ETR61NP isolating relay, the power supply to an extractor hood is switched on as long as the window is open. The ETR61NP can be placed in the flush-mounted box behind the socket for the extractor hood. Installing the window contact FK: Lever out the inserts on the narrow side of the housing. Connect the reed relay and cut out a housing cutout for the cable. Glue both housings in parallel at a maximum of 15mm away and screw them on additionally if necessary. In the longitudinal direction, the magnet can be rotated in any direction relative to the reed relay.