Switching relay 1W potential-free 10A/250V - Installation relay ER61-UC

ER61-UC 61001601 4010312205358 EAN/GTIN DE 30298319 WEEE

Our best price
¥246.57 excl. VAT
¥444.55 (-44.53% RRP***)

4-5 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switching relay 1W pot. free 10A/250V ER61-UC partially electronic function, flush-mounting type,... more
Switching relay 1W potential-free 10A/250V - Installation relay ER61-UC – Eltako – 61001601 – 4010312205358: Switching relay 1W pot. free 10A/250V ER61-UC partially electronic function, flush-mounting type, width in modular units 0, installation depth 18mm, number of NO contacts 0, number of NC contacts 0, number of changeover contacts 1, control voltage 1 8 . .. 230V, type of control voltage 1 AC/DC, frequency of the control voltage 1 50 ... 50Hz, rated current 10A, supply voltage 250 ... 250V, type of voltage of the supply voltage AC, max. incandescent lamp load 2000W, max. fluorescent lamp load 1000VA, max circuit) 1000VA, max. fluorescent lamp load (parallel compensated) 500VA, max. switching current (cos phi = 0.6) 4A, switching relay UC. 1 potential-free changeover contact 10A/250V AC, incandescent lamps 2000W. No standby loss. For recessed and surface mounting. 45mm long, 45mm wide, 18mm deep. The latest hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Universal control voltage 8..230V UC. Very low switching noise. Due to the use of a bistable relay, there is no coil power loss and no heating as a result, even when switched on. The relay contact can be open or closed during commissioning and is synchronized with the first actuation. This relay is not suitable for feedback with the switching voltage of a dimmer switch. Only use the relays ESR12DDX-UC, ESR12NP-230V+UC or ESR61NP-230V+UC for this. The electronics do not have their own power supply and therefore no standby loss. Only when the control contact is closed is the microcontroller activated, which switches the bistable relay in the right direction. When the control contact opens or the control voltage drops, it switches back.
... more
Function in part electronically
Mounting Flush
Depth 18 mm
Number of contacts as normally open 1
Control voltage 1 8..230 V
Control voltage type 1 AC/DC
Frequency of control voltage 1 50 Hz
Rated current 10 A
Supply voltage 250V
Voltage type of the supply voltage AC
Max. Incandescent lamp load 2000 W
Max. Fluorescent lamp load 1000 VA

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Switching relay 1W potential-free 10A/250V - Installation relay ER61-UC"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.