Flow heater 18KW - Instantaneous water heater 18kW AEG DDLE EASY 18

Flow heater 18KW - Instantaneous water heater 18kW AEG DDLE EASY 18 – EHT AEG – 228840 – 4041056025070: Instantaneous water heater 18KW AEG DDLE EASY 18 energy efficiency class A, energy efficiency class spectrum A to G, material of the pressure vessel plastic, nominal capacity 0.4l, max. permissible operating pressure 10bar, nominal power 18kW, nominal voltage 1 380V, nominal voltage 2 400V, manual operation, analogue temperature display, type of installation Oversink/undersink, electronic power control, connected load 18 ... 18kW, bare wire heating system, safety shut-off pressure shut-off, protection class (IP) IP25, connection for cold drinking water external thread, nominal inside diameter for cold drinking water 1/2 inch (15), outside pipe diameter for cold drinking water 21.5 mm, connection Hot water external thread, nominal inside diameter of hot water connection 1/2 inch (15), pipe outside diameter of hot drinking water 21.5 mm, suitable for plastic pipe, electronic control type, height 485 mm, width 226 mm, depth 90 mm, weight 3.6 kg, instantaneous water heater, electronically controlled, for supply from vanity, kitchen sink, shower, bathtub. Electronics with good temperature comfort. Two fixed temperatures 42 °C and 55 °C with application icons. Fast control electronics for high temperature constancy Heating block made of glass fiber reinforced polyamide. 4 heating coils lying directly in the water. Measuring turbine for precise flow rate measurement, electronic air bubble detection. Largely constant outlet temperatures with pressure and inlet temperature fluctuations. Connection options for long-distance and direct tapping. For connection to XLPE plastic pipes with DVGW test mark. Easy assembly with separate mounting plate and screw cap, with assembly template, hood disassembly from the front, without screws, electrical connection from above or below. Power supply with permanent connection. Oversink installation, undersink installation possible with accessory UT 104. Connection to all commercially available closed fittings. VDE/GS mark, radio protection mark/EMV.