Miniature circuit breaker 1-p B32A DLS 6I B32-1 10 kA

Miniature circuit breaker 1-p B32A DLS 6I B32-1 10 kA – Doepke – 09916026 – 4014712169715: Circuit breaker DLS 6I B32-1 10 kA tripping characteristic B, number of poles (total) 1, number of fused poles 1, rated current 32A, rated voltage 400V, rated insulation voltage Ui 2V, rated impulse withstand voltage Uimp 4kV, rated switching capacity Icn according to EN 60898 at 230 V 10kA, rated switching capacity Icn according to EN 60898 at 400 V 0kA, rated switching capacity Icu according to IEC 60947-2 at 230 V 0kA, rated switching capacity Icu according to IEC 60947-2 at 400 V 0kA, type of voltage AC/DC, frequency 16.67 ... 60Hz, energy limitation class 3, overvoltage category 3 , degree of pollution 2, additional equipment possible, width in pitch units 1, installation depth 68mm, degree of protection (IP) IP20, ambient temperature during operation -25 ... 55°C, connectable conductor cross-section stranded 1.5 ... 25mm², connectable conductor cross-section solid 0, 5 ... 25mm², the task of circuit breakers is the automatic switching off of circuits to protect lines and nec connected devices. After being switched off, they can be switched on again manually without e.g. B. fuse links would have to be replaced. Each of our line protection circuits is equipped with a trip-free release, which ensures safe switching off, even in the event of e.g. B. mechanically blocked toggle switch guaranteed. Miniature circuit breakers of the DLS 6 series protect cables, lines and installation devices against overload and short circuits in accordance with DIN VDE 0100. The series includes a large selection of different types, from switches for residential and functional buildings to switches for industrial areas. Due to their compact design, miniature circuit breakers of the DLS 6 series offer maximum space savings for convenient wiring. The large clamping range and the possibility of using commercially available wiring rails ensure easy installation. In addition, it is possible to connect a large number of additional devices such as shunt trips and auxiliary and fault indicators. The DLS 6i version is particularly suitable for use in industrial plants thanks to its high rated switching capacity of 10 kA. Switches with tripping characteristic B ensure the standard protection for light and socket circuits. Properties: rated switching capacity 10 kA, clamping yoke terminals with a wide range of terminal cross-sections for busbar and line wiring on both connection sides, special quick fastening for removing several miniature circuit breakers from the lower or upper busbar assembly, large. Hinged labeling window for a secure hold and protection of the label, use of commercially available wiring rails, ON/OFF switch position indicator on the toggle switch, accessories can be retrofitted on the right, free labeling software, type of installation: quick attachment to mounting rail, any installation position, areas of application: suitable for use in power supplies for industrial plants and non-residential or commercial buildings.