DEHNbloc M FM lightning arrester - Lightning arrest for power supply 50kA DB M 1 255 FM

DB M 1 255 FM 961125 4013364118621 EAN/GTIN DE 11890845 WEEE

Our best price
¥1,575.26 excl. VAT
¥2,983.44 (-47.2% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Lightning current arrester DEHNbloc M FM DB M 1 255 FM TN system type, TN-C system type, TN-CS... more
DEHNbloc M FM lightning arrester - Lightning arrest for power supply 50kA DB M 1 255 FM – Dehn – 961125 – 4013364118621: Lightning current arrester DEHNbloc M FM DB M 1 255 FM TN system type, TN-C system type, TN-CS system type, TN-S system type, TT system type, number of conductors (without earth) 1, lightning impulse current (10/350 µs) 50kA, nominal discharge current ( 8/20) 50kA, maximum continuous voltage AC 255V, nominal voltage AC 230V, protection level 2.5kV, follow current extinguishing capability 50kA, specific energy (W/R) 625kJ/Ohm, mounting type DIN rail TH35, size 2 HP, max. stranded) 50mm², max. conductor cross-section, flexible (finely stranded) 35mm², with remote signaling contact, optical signaling on the device, test class type 1, degree of protection (IP) IP20, single-pole, coordinated lightning arrester DEHNbloc modular, type 1 according to EN 61643-11 based on spark gaps, consisting of Base part and plugged-in protection module. Maximum system availability thanks to RADAX Flow follow current limitation. To protect low-voltage consumer systems against overvoltages, even in the event of direct lightning strikes. For use in the lightning protection zone concept at the interfaces 0A - 1.
... more
Network form DC no
Network form IT no
Network shape TN yes
Mains form TN-C yes
Mains form TN-CS yes
Mains form TN-S yes
Network shape TT yes
Network form other no
Number of conductors (without earth) 1
Lightning impulse current (10/350 µs) 50 kA
Nominal discharge current (8/20) 50 kA
Highest continuous voltage AC 255V
Rated voltage AC 230V
Protection level 2.5 kV
Follow current extinguishing capability 50 kA
Specific energy (W / R) 625 kJ/ohms
Mounting DIN rail TH35
Size 2 TE
With telecommunication contact yes
Blow out no
Signaling on the device optical
Test class type 1 yes
Integrated backup fuse no
Suitable for outdoor use no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "DEHNbloc M FM lightning arrester - Lightning arrest for power supply 50kA DB M 1 255 FM"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.