DEHNbloc Maxi lightning arrester - Lightning arrest for power supply 25kA DBM 1 760 FM

Dehn - DBM 1 760 FM - DEHNbloc Maxi lightning arrester - Lightning arrest for power supply 25kA DBM 1 760 FM
Photo source: fig. possibly similar
Photo source: fig. possibly similar
DBM 1 760 FM 961175 4013364116283 EAN/GTIN DE 11890845 WEEE

Our best price
¥2,488.42 excl. VAT
¥4,713.02 (-47.2% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
DEHNbloc Maxi DBM 1 760 FM lightning current arrester, system type DC=no, system type IT=yes,... more
DEHNbloc Maxi lightning arrester - Lightning arrest for power supply 25kA DBM 1 760 FM – Dehn – 961175 – 4013364116283: DEHNbloc Maxi DBM 1 760 FM lightning current arrester, system type DC=no, system type IT=yes, system type TN=yes, system type TN-C=yes, system type TN-CS=yes, system type TN-S=yes, system type TT=yes, system type other=no, number of conductors (without earth)=1, lightning impulse current (10/350 µs)=25 kA, nominal discharge current (8/20)=25 kA, maximum continuous voltage AC=760 V, nominal voltage AC=690 V, protection level= 4 kV, protection level N-PE=4 kV, follow current extinguishing capability=25 kA, specific energy (W/R)=156.25 kJ/Ohm, mounting type=DIN rail TH35, size=2 TE, max )=50 mm², max. conductor cross-section, flexible (finely stranded)=35 mm², with remote signaling contact=yes, blow-out=no, signaling on the device=optical, test class type 1=yes, degree of protection (IP)=IP20, single-pole, coordinated DEHNbloc Maxi lightning current arrester , Type 1 according to EN 61643-11 based on spark gaps. High follow current extinguishing capability and follow current limitation thanks to RADAX Flow technology. To protect low-voltage consumer systems against overvoltages, even in the event of direct lightning strikes. For use in the lightning protection zone concept at the interfaces 0A - 1.
... more
Network form DC no
Network form IT yes
Network shape TN yes
Mains form TN-C yes
Mains form TN-CS yes
Mains form TN-S yes
Network shape TT yes
Network form other no
Number of conductors (without earth) 1
Lightning impulse current (10/350 µs) 25 kA
Nominal discharge current (8/20) 25 kA
Highest continuous voltage AC 760V
Rated voltage AC 690V
Protection level 4 kV
Protection level N-PE 4 kV
Follow current extinguishing capability 25 kA
Specific energy (W / R) 156.25 kJ/ohms
Mounting DIN rail TH35
Size 2 TE
With telecommunication contact yes
Blow out no
Signaling on the device optical
Test class type 1 yes
Integrated backup fuse no
Suitable for outdoor use no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "DEHNbloc Maxi lightning arrester - Lightning arrest for power supply 25kA DBM 1 760 FM"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.