Combination arrester module Blitzductor XT with LF - Combined arrester for signal systems BXT ML2...

Dehn - BXT ML2 BD DL S 15 - Combination arrester module Blitzductor XT with LF - Combined arrester for signal systems BXT ML2...
Photo source: fig. possibly similar
Photo source: fig. possibly similar
BXT ML2 BD DL S 15 920243 4013364126732 EAN/GTIN DE 11890845 WEEE

Our best price
¥723.41 excl. VAT
¥1,370.06 (-47.2% RRP***)

15-16 days* (CHN)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Blitzductor XT combined arrester module with LF BXT ML2 BD DL S 15 Rated voltage DC 15 ... 15V,... more
Combination arrester module Blitzductor XT with LF - Combined arrester for signal systems BXT ML2... – Dehn – 920243 – 4013364126732: Blitzductor XT combined arrester module with LF BXT ML2 BD DL S 15 Rated voltage DC 15 ... 15V, maximum continuous voltage AC 12V, maximum continuous voltage DC 17V, lightning impulse current (10/350 µs) 9kA, nominal discharge current (8/20) 20kA , rated load current 0.4A, protection level wire/wire 24V, protection level wire/earth 550V, limit frequency 2.7MHz, type of mounting on base element, arrester monitoring, explosion-tested design, space-saving combined arrester module with LifeCheck to protect 1 pair of unearthed symmetrical interfaces, specially coordinated to the requirements of the Dupline bus, either direct or indirect shield grounding. LifeCheck detects thermal or electrical overload conditions after which the arrester must be replaced. The display is contactless using DEHNrecord LC / SCM / MCM.
... more
Rated voltage DC 15 V
Highest continuous voltage AC 12V
Highest continuous voltage DC 17 V
Lightning impulse current (10/350 µs) 9 kA
Nominal discharge current (8/20) 20 kA
Nominal load current 0.4 A
Protection level wire / core 24V
Protection level core / earth 550V
Cut-off frequency 2.7 MHz
Mounting on base element
Connection 1 Screw terminal
SPD yes
With telecommunication contact no
Explosion-tested version yes
Separation option for signal circuit no
Number of conductors (without earth) 2
Earthing via DIN rail
Overall width 12 mm
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Combination arrester module Blitzductor XT with LF - Combined arrester for signal systems BXT ML2..."
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.